King Springs for Jag XJ6/12
#1
King Springs for Jag XJ6/12
It may be of interest to some Jag owners that Sparesbox on ebay are currently selling King Springs for around $155 including freight.
I took my front coil lowered King Springs out because it was too low but with STD V12 coils and a Chev engine it is now too high.
The STD springs are 305mm in length while the lowered King Springs were 255mm.
I'm going to go with STD coils meant for the Chev engined Jag, they are 270mm.
Hopefully I'll be able to slip a jack under it.
https://www.sparesbox.com.au/part/ki...-front-kjfs-05
I took my front coil lowered King Springs out because it was too low but with STD V12 coils and a Chev engine it is now too high.
The STD springs are 305mm in length while the lowered King Springs were 255mm.
I'm going to go with STD coils meant for the Chev engined Jag, they are 270mm.
Hopefully I'll be able to slip a jack under it.
https://www.sparesbox.com.au/part/ki...-front-kjfs-05
The following users liked this post:
Daf11e (05-16-2018)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)