I tried to update IMC (Infotainment Master Controller) using Pathfinder. The assembly part number before the update is KW93-19C201-JG, and the update destination is J9C3-19C201-TZ. (Pathfinder reads CCF and sets it automatically) However, the update failed. (Because pathfider freezes)

After trying several times, I found that there are two points where the update fails.

The first is that the PostNdufFlash process stops at 30%.
07.12.2020 00:27:48,790 console - Raw Answer IMC: 62 A0 AC 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
07.12.2020 00:27:48,790 console - errorLog(message: ##= NDU A0AC Poll
07.12.2020 00:27:48,791 console - errorLog(message: ##= CURRENT A0AC = A0AC00FFFFFF
07.12.2020 00:27:48,792 console - errorLog(message: ##= LAST A0AC = A0AC00FFFFFF
07.12.2020 00:27:48,792 console - errorLog(message: ##= RETRY_COUNT: 0
07.12.2020 00:27:48,793 console - errorLog(message: ##= POLL_COUNT: 52
07.12.2020 00:27:48,793 console - errorLog(message: ##= Update in progress 30%
07.12.2020 00:27:49,556 console - SendRaw IMC: 22 A0 AC
This process may work by forcing a rewrite of the destination assembly (assemblyPartNumberStore.json).

The second is the model configuration process after the above process is finished, which fails with the message "Request is out of range".

Does anyone know how to overcome this situation?

My environment is below.
F-type V6 P380 MY2020
VIN:SAJDB1CV3LCK66XXX
Battery supporter is linear 30A power supply