From 10.5x20 295/30 series to 11,5x20 295/25 does not work in Germany because of the rolling circumference of the tires. This tolerance shall not be more than 4%. With the rear 295/25 I would have 4.3%, so only the 305/25 remain.

 

Those really look sweet...

 

Looking at this picture, I would suspect that the wrap installer accidentally rotated the film 90 or 180 degrees before cutting and installing the door panel.
From this camera angle and lighting, the distinct difference in the door color from both the rear quarter panel and the front fender - directly along the seems of the door - is not the result of angle or lighting. Looks more like the grain of the film is different than the two adjacent panels, and therefore is refracting the light differently... unless of course this was done intentionally from some reason.

Otherwise, really like this unique color!!! Good job.

 

Which offset have your wheels?

 

definitely the most detailed breakdown I've received about the wrap! hahah
I think it may just be the photo, I parked my car in the sun after I read this to see if the color shift had a different pattern and it was the same

 

The wheels are

20x9 et 35
20x11.5 et 30

 

What are the OEM offsets on the 20" wheels on a v8s convert? Also isn't the 11.5"width too wide for the 295/30/20 mass tires?

 

Oops. Mpss not mass.

 

52 front, 38 rear.

 

That should look with me then just as with you. Have the exact dimensions as you ordered. The only difference is the tires, here 245/30 and 305/25. I am looking forward to it when everything is installed.

 

Now finished:

 

Yes!!! Looks amazing!!!!

 

More pics in the official picture thread...
I like the fr8...
Great look