Has anyone installed an oil catch can on an F Type R?

 

Yes, one or two on this forum have done so. It might be difficult, but you should be able to find a discussion or two with a search.

 

Yes, and quite honestly it is completely useless. It will not catch more than a few drops so I would spare yourself the cost and the time.

 

I installed a Bob's a while back and am coming up on my 15K update. Wouldn't call it useless, but Jag did do a very good job of building an oil separator into the PCV return line. This doesn't pull anywhere near the ammount of oil that it did on my Ford 5.8 SC.

https://www.jaguarforums.com/forum/f...arator-217329/

 

A couple of years ago I installed a Mitsubishi oil catch can on my 2015 Ftype R. It had about an eighth of a cup ( actually a bit less) last couple of oil changes; while I am happy not to have this oil settling on my valves, it isn't really very much.

I suppose a properly baffled catch can of any kind will work, the Mitsubishi has at least performed as advertised and for the cost etc.. glad I did it, but it does not seem like an upgrade that will appeal to everyone.

Lawrence