oil change

Reply Subscribe

Thread Tools

Search this Thread

#21

11-27-2022, 05:36 PM

OzXFR

Veteran Member

Join Date: Feb 2014

Location: Adelaide, South Australia

Posts: 8,461

Likes: 617

Received 3,225 Likes on 2,379 Posts

Quote:

Originally Posted by SteveHall

I have a 2014 V8s, and I usually use an extractor, but want to do it old school this time. I have a new drain plug ready to go but no torque value. I would think the 24 nm quoted for the V6 here would also apply to the v8, but can anyone confirm?

thanks
Steve

Same sump (other than RWD vs AWD) and same sump plug so yes same torque.
Before I switched to the "extraction pump from the top method" I drained the oil countless times on my XFR and F-Type via the sump plug and I never once used a torque wrench when replacing it and I never once had a problem with leaking (not tight enough) or hard to get off (too tight). I simply did it up to the German spec, "gutentite".

Reply Like

The following users liked this post:

SteveHall (11-27-2022)