plastidip fog rear light
#1
plastidip fog rear light
i buy a bottle because i want to plastidip the 2 fog rear light and i want ask it's easy to remove the light from the car is only remove the 3 screw and the connector ?
or i need to do more ? is possible that if i remove the connector after i read cel message ?
what you think about plastidip black the 2 fog light ?
thx
i really prefer all black the rear valance
#2
#5
There is a smoke plastidip.
I've seen people use the black dip on taillights and it's tricky. It's easy to spray on too much but not enough doesn't look right.
Using the smoke dip apparently eliminates that issue.
I debated this route too but decided to use tint instead.
In any event, there are a lot of video's on youtube.
Here is one:
#7
Join Date: Feb 2014
Location: Adelaide, South Australia
Posts: 8,514
Received 3,263 Likes
on
2,408 Posts
There is a smoke plastidip.
I've seen people use the black dip on taillights and it's tricky. It's easy to spray on too much but not enough doesn't look right.
Using the smoke dip apparently eliminates that issue.
I debated this route too but decided to use tint instead.
In any event, there are a lot of video's on youtube.
Here is one: https://www.youtube.com/watch?v=_057sYeJOQ8
I've seen people use the black dip on taillights and it's tricky. It's easy to spray on too much but not enough doesn't look right.
Using the smoke dip apparently eliminates that issue.
I debated this route too but decided to use tint instead.
In any event, there are a lot of video's on youtube.
Here is one: https://www.youtube.com/watch?v=_057sYeJOQ8
I don't think the OP wants to tint his fog lights (the red lights in the valance/diffuser panel), I think he wants to hide them completely by painting or plasticoating them gloss black the same as the valance.
Trending Topics
#11
#12
i buy a bottle because i want to plastidip the 2 fog rear light and i want ask it's easy to remove the light from the car is only remove the 3 screw and the connector ?
or i need to do more ? is possible that if i remove the connector after i read cel message ?
what you think about plastidip black the 2 fog light ?
thx
i really prefer all black the rear valance
I can't refrain from commenting any longer. Don't you have fog where you are located? Blacking or tinting any light severely compromises it's intended purpose even in clear weather. Enough cars are rear ended each year without the diminished light output. Your car will stop in under half the distance many vehicles do on the road. Don't make this issue worse.
#14
#17
i do a test on the honda after the wash test and all i remove from honda , so honda now is like before i apply plastidip
i do 3 hand on jaguar and only the rear foglights
i test and when i put fog light on i see the light same for white light the results is the rear valance is like total black but the light works
later i do pic
i do 3 hand on jaguar and only the rear foglights
i test and when i put fog light on i see the light same for white light the results is the rear valance is like total black but the light works
later i do pic
Thread
Thread Starter
Forum
Replies
Last Post
WRXtranceformed
XF and XFR ( X250 )
56
01-08-2020 12:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)