F-Type ( X152 ) 2014 - Onwards
Sponsored by:
Sponsored by:

Service Manual, A pillar removal

Thread Tools
 
Search this Thread
 
  #1  
Old 12-08-2014, 11:07 PM
SMc's Avatar
SMc
SMc is offline
Member
Thread Starter
Join Date: Sep 2014
Location: Denver, CO USA
Posts: 30
Received 2 Likes on 1 Post
Default Service Manual, A pillar removal

Does anyone know where to purchase detailed service manuals for the F Type? I'm trying to figure out how to put wires underneath the A pillar and windscreen header for a radar detector, and always like to have a manual set lying around for projects.
 
  #2  
Old 12-09-2014, 12:47 AM
WaltB's Avatar
Senior Member
Join Date: Jun 2014
Location: Dallas, Texas
Posts: 207
Received 98 Likes on 56 Posts
Default

No service manual but the A- pillar is easily removed.
The A-pillar has 4-7mm bolts on the back that need to be removed once you take the side panel, (just pops out), and the rubber trim that easily pulls out of the way. I had it off in about 7 minutes.

Walt
 
The following users liked this post:
SMc (12-14-2014)
  #3  
Old 12-14-2014, 12:53 PM
SMc's Avatar
SMc
SMc is offline
Member
Thread Starter
Join Date: Sep 2014
Location: Denver, CO USA
Posts: 30
Received 2 Likes on 1 Post
Default

Perfect and thank you!
 
  #4  
Old 12-14-2014, 01:29 PM
WayneB's Avatar
Senior Member
Join Date: Aug 2013
Location: NorCal
Posts: 324
Received 88 Likes on 61 Posts
Default

Isn't there any 12 V switched power already in the mirror console so that you don't have to run more wires up there through the A pillar for a radar detector?
 
  #5  
Old 12-14-2014, 02:31 PM
SMc's Avatar
SMc
SMc is offline
Member
Thread Starter
Join Date: Sep 2014
Location: Denver, CO USA
Posts: 30
Received 2 Likes on 1 Post
Default

The plan is to install a Valentine 1, running off the V1 Savvy via the ODB port. I need to run the cable up the a pillar to do this. With the detector power running down under the dash I can also add on/off if wanted without having to reach up near the mirror to do so.
 
  #6  
Old 12-14-2014, 03:35 PM
schraderade's Avatar
Veteran Member
Join Date: Mar 2014
Location: San Francisco
Posts: 1,112
Received 401 Likes on 209 Posts
Default

Originally Posted by SMc
The plan is to install a Valentine 1, running off the V1 Savvy via the ODB port. I need to run the cable up the a pillar to do this. With the detector power running down under the dash I can also add on/off if wanted without having to reach up near the mirror to do so.
I did it without any disassembly of the A pillar. You can just push the cable into the gap between lining and the body. It helps to have some interior tools to do this... Griots sells a good set.

https://www.jaguarforums.com/forum/f-type-72/valentine-one-install-121975/
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jpav27
US Northeast
3
12-17-2021 05:40 AM
bamforp
XK8 / XKR ( X100 )
26
09-26-2021 08:04 AM
dsnyder586
XJ XJ8 / XJR ( X308 )
55
04-04-2019 02:38 PM
Sambo21
XK8 / XKR ( X100 )
10
11-19-2015 03:55 PM
Harry Dredge
XJ6 & XJ12 Series I, II & III
21
10-07-2015 01:17 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Service Manual, A pillar removal



All times are GMT -5. The time now is 12:58 PM.