Spoiler question
#1
#2
The following users liked this post:
limelightimages (07-28-2017)
#4
The following users liked this post:
limelightimages (07-28-2017)
#5
The following users liked this post:
limelightimages (07-28-2017)
#6
The following users liked this post:
limelightimages (07-28-2017)
#10
Join Date: Feb 2014
Location: Adelaide, South Australia
Posts: 8,433
Received 3,209 Likes
on
2,366 Posts
#12
I had to remount my J. The adhesive softened in the hot sun and the corner got caught in the wash mitt and popped off. I cleaned out the old adhesive on the J and on the car with goof off. Then I stuck double sided 3M tape to the bottom of the J. Put it on a cutting board and trimmed the excess tape away with an X-acto knife. Then peeled off the backing and stuck it back on. I had marked the exact position with masking tape. Then I waxed the area. Better than new.
The following users liked this post:
limelightimages (08-03-2017)
#13
#14
The following users liked this post:
limelightimages (08-03-2017)