View Poll Results: Which grille do you prefer - standard with bar or P7 with no bar?
Voters: 86. You may not vote on this poll
Vote: Front Grille Bar
#41
There's all kinds of custom fabrications that you COULD do and I've thought of modifying the factory surround by infilling the cutouts but honestly, IF you can buy the P7 parts it's a no-brainer at the cost from Jaguar.....problem is getting the parts.
Clearly by the results of the poll with 4 out of 5 respondents preferring the P7 grille look, there could be some success in a reasonably priced aftermarket grille and surround.....which I think is the only way most people would consider the swap.
Dave
Clearly by the results of the poll with 4 out of 5 respondents preferring the P7 grille look, there could be some success in a reasonably priced aftermarket grille and surround.....which I think is the only way most people would consider the swap.
Dave
#42
#43
My theory is that the vast majority of F-Type owners are ambivalent, for which there was no poll category. I just don't think there's enough demand to justify development of such an aftermarket part. In fact, the aftermarket has yet to conclude there's enough of a market to develop virtually anything for the F-Type.
#44
Cheers,
Dave
#45
The following users liked this post:
Unhingd (04-18-2016)
#47
My theory is that the vast majority of F-Type owners are ambivalent, for which there was no poll category. I just don't think there's enough demand to justify development of such an aftermarket part. In fact, the aftermarket has yet to conclude there's enough of a market to develop virtually anything for the F-Type.
Regardless, there are clearly more than a handful of "vocal" people that aren't fond of the bar! ;-) ... but while there appears to be strong demand amongst an elite group of enthusiasts, you are correct; the F type isn't exactly a high production vehicle so a market analysis would have to be done to determine tooling and production costs vs. actual selling price to see if anything is feasible.
Cheers,
Dave
#48
I see a poll where 37 posters said they'd go for it "if they could." If it became available and once folks became aware of the total cost of parts and installation, my WAG would be maybe 12 actually get done.
Contrary to what someone said, it is NOT a 15 minute job. I've had my nose off, and there is quite a bit of fiddling required to reinstall it and get all the seams matched up right again.
It's easy to say you want something, and quite another to actually get it done.
Contrary to what someone said, it is NOT a 15 minute job. I've had my nose off, and there is quite a bit of fiddling required to reinstall it and get all the seams matched up right again.
It's easy to say you want something, and quite another to actually get it done.
#49
I see a poll where 37 posters said they'd go for it "if they could." If it became available and once folks became aware of the total cost of parts and installation, my WAG would be maybe 12 actually get done.
Contrary to what someone said, it is NOT a 15 minute job. I've had my nose off, and there is quite a bit of fiddling required to reinstall it and get all the seams matched up right again.
It's easy to say you want something, and quite another to actually get it done.
Contrary to what someone said, it is NOT a 15 minute job. I've had my nose off, and there is quite a bit of fiddling required to reinstall it and get all the seams matched up right again.
It's easy to say you want something, and quite another to actually get it done.
Maybe......but the original question was only whether people liked the bar or not....in that respect the poll is conclusive: far more than a "handful" of people don't like the bar. It is what it is.
Yes, that doesn't equate to a business case and I agree on the 15 minute comment; in fact I'm sure it'd take me several hours and that's before dealing with the parking sensor issue.
Dave
#50
OK, we're now armed with the knowledge that the bar lost an election by a wide margin, where less than 50 votes were cast. However, it's only meaningful if there are big enough numbers to build a business case strong enough to motivate someone to develop that part, and will enough people who hate the bar enough to actually pay the price for changing it.
#51
OK, we're now armed with the knowledge that the bar lost an election by a wide margin, where less than 50 votes were cast. However, it's only meaningful if there are big enough numbers to build a business case strong enough to motivate someone to develop that part, and will enough people who hate the bar enough to actually pay the price for changing it.
Dave
#52
#53
Still waiting on the shifter and the engine cover. Progress on these seems to be moving more slowly than recent movement of the polar ice cap boundaries.
Eurotoys, however, did come through with the +18mm lower pulley kit for the V6.
The following users liked this post:
Eurotoys (04-18-2016)
#54
I was able to get my hands on the Project 7 grill and grill surround, and am happy to report that they fit the stock front facia perfectly. The mounting points are all exactly the same, so the only fabrication comes in making custom mounts for the parking sensors. Even that is pretty straightforward, as the openings in the Project 7 grill are large enough to easily accomidate the sensors. Just be sure to mount them at approximately the same height as the stock location to avoid calibration issues.
I had my installer paint the grill surround gloss gloss black prior to installation. While he had the car, I had him remove and repaint the aluminum window surrounds gloss black as well, as the "black pack" option was not available on 2015s in blue.
Needless to say, I am very happy with the results.
I had my installer paint the grill surround gloss gloss black prior to installation. While he had the car, I had him remove and repaint the aluminum window surrounds gloss black as well, as the "black pack" option was not available on 2015s in blue.
Needless to say, I am very happy with the results.
Last edited by rocspo; 06-29-2016 at 06:10 PM.
The following 7 users liked this post by rocspo:
DPelletier (07-02-2016),
F12guy (12-19-2016),
Foosh (06-29-2016),
IRRBrogue (06-29-2016),
JgaXkr (07-03-2016),
and 2 others liked this post.
#55
I forgot to mention that the large styrofoam piece behind the grill bar will not fit with the Project 7 grill, and will have to be removed. I also had him paint everything behind the grill flat black, so you can't see anything through the grill, whose openings are considerably larger than those on the stock grill.
Also, the Jaguar badge will need to be removed from the stock grill and installed on the new one, as it arrived without one.
Also, the Jaguar badge will need to be removed from the stock grill and installed on the new one, as it arrived without one.
Last edited by rocspo; 06-29-2016 at 06:07 PM.
#56
I forgot to mention that the large styrofoam piece behind the grill bar will not fit with the Project 7 grill, and will have to be removed. I also had him paint everything behind the grill flat black, so you can't see anything through the grill, whose openings are considerably larger than those on the stock grill.
Also, the Jaguar badge will need to be removed from the stock grill and installed on the new one, as it arrived without one.
Also, the Jaguar badge will need to be removed from the stock grill and installed on the new one, as it arrived without one.
I would be indentured for life to you if you could fabricate me a grill such as yours so I can plug/play.
PM me as to what would have to happen for me to be next in line.
Extremely interested!
Last edited by polarisnavyxj; 06-29-2016 at 06:19 PM.
#57
Rosco, my bar is drilled out with four gaping screw holes thankfully provided by the dealer for the front plate holder so I am in the precarious position of, get this, buying a new bar!
I would be indentured for life to you if you could fabricate me a grill such as yours so I can plug/play.
PM me as to what would have to happen for me to be next in line.
Extremely interested!
I would be indentured for life to you if you could fabricate me a grill such as yours so I can plug/play.
PM me as to what would have to happen for me to be next in line.
Extremely interested!
#58
I was able to get my hands on the Project 7 grill and grill surround, and am happy to report that they fit the stock front facia perfectly. The mounting points are all exactly the same, so the only fabrication comes in making custom mounts for the parking sensors. Even that is pretty straightforward, as the openings in the Project 7 grill are large enough to easily accomidate the sensors. Just be sure to mount them at approximately the same height as the stock location to avoid calibration issues.
I had my installer paint the grill surround gloss gloss black prior to installation. While he had the car, I had him remove and repaint the aluminum window surrounds gloss black as well, as the "black pack" option was not available on 2015s in blue.
Needless to say, I am very happy with the results.
I had my installer paint the grill surround gloss gloss black prior to installation. While he had the car, I had him remove and repaint the aluminum window surrounds gloss black as well, as the "black pack" option was not available on 2015s in blue.
Needless to say, I am very happy with the results.
#60
I see a little Cheshire cat here...
Kind of a wry feline smile. I dig it.
The bumper looks like a cat with braces.
The elephant in the room that no one has even bothered to mention is....
What if we bump into something, I see the entire nose folding in like a coke can.
Kind of a wry feline smile. I dig it.
The bumper looks like a cat with braces.
The elephant in the room that no one has even bothered to mention is....
What if we bump into something, I see the entire nose folding in like a coke can.
Last edited by polarisnavyxj; 06-29-2016 at 10:48 PM.