Wanted: 3D Model of F-Type to 3D Print
#1
Wanted: 3D Model of F-Type to 3D Print
I got a 3D printer for xmas and one of my first thoughts was to make a 3D print of an F-Type. I've been searching for an F-Type to buy but in the mean time, I think a printed one for my desk will hold me over.
I've seen a handful of paid 3D models online but most of them are for on-screen display and not for printing. If anyone has or has a lead on where I can find a free-er 3D model then I can then edit to print or has a printable 3D model already, please let me know!
P.S. ISO 2016-2019 F-Type S Coupe MT (with any interior color that isn't red). Please let me know if you find one!
I've seen a handful of paid 3D models online but most of them are for on-screen display and not for printing. If anyone has or has a lead on where I can find a free-er 3D model then I can then edit to print or has a printable 3D model already, please let me know!
P.S. ISO 2016-2019 F-Type S Coupe MT (with any interior color that isn't red). Please let me know if you find one!
#2
hereby one but cabrio, search website mentioned below
Please tip the designer if good model: https://www.thingiverse.com/pierrecool/designs
Please tip the designer if good model: https://www.thingiverse.com/pierrecool/designs
Last edited by bcbruno; 12-28-2020 at 04:25 PM.
#4
#6
Lookin for 3D model in the rough
hereby one but cabrio, search website mentioned below
Please tip the designer if good model: https://www.thingiverse.com/pierrecool/designs
Please tip the designer if good model: https://www.thingiverse.com/pierrecool/designs
WITH VAP LOWER PULLEY AND TUNE!!!~
Happy New Year, Sparky
#7
I'm literally on my 4th print ever but let me get some kinks out and I'll give it a shot! What dimensions are you looking for? My print bed is 350x350x400mm.
Trending Topics
#8
#9
#10
#11
I have an old 911 and the Porsche tax for some parts is ridiculous and there are other parts that were never made... (plastic door handles for G body cars) so I have taken to drawing parts up in CAD and either printing them locally (cough cough) or depending on the material needed using this company:
https://www.shapeways.com
Gear knob eventually printed in steel (for a hefty feeling in your hand)
Window opener for rear window (part was unobtanium for a while or $$$)
sketch:
CAD
Part printed and ready for grind and polish:
Door handle CAD (G body) never made in plastic unlike earlier cars:
Proto printed part (showing weight difference to other builders) - wasn’t intended to end up on a car, but is now in use in France!
Modified CAD of my final version:
I’ve done tons more and typically used Shapeways.
Shapeways has been great for printing most of my high accuracy parts. Especially the steel and ceramic bits.
That said, I would love a printer of my own in the garage! Dan Mandle - I’m soooo envious!
https://www.shapeways.com
Gear knob eventually printed in steel (for a hefty feeling in your hand)
Window opener for rear window (part was unobtanium for a while or $$$)
sketch:
CAD
Part printed and ready for grind and polish:
Door handle CAD (G body) never made in plastic unlike earlier cars:
Proto printed part (showing weight difference to other builders) - wasn’t intended to end up on a car, but is now in use in France!
Modified CAD of my final version:
I’ve done tons more and typically used Shapeways.
Shapeways has been great for printing most of my high accuracy parts. Especially the steel and ceramic bits.
That said, I would love a printer of my own in the garage! Dan Mandle - I’m soooo envious!
#12
I would definitely be down for a 2016 silver/grey coupe with blade wheels - would be happy to cover costs plus shipping and a reasonable reward for the effort! If you get it dialed in, send a Pm. Thanks,
Thread
Thread Starter
Forum
Replies
Last Post
polarisnavyxj
F-Type ( X152 )
1
06-07-2016 05:11 PM
tai4de2
F-Type ( X152 )
2
10-09-2013 10:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)