Modding your Jag?
#21
#22
![Default](/forum/images/icons/icon1.gif)
Here are as few (crappy...lol) pictures of the new headliner and headliner trim. A couple of the pictures didn't come out so good, so I'll move the car into the light and take some more.
I'm going to do the center posts and some of the other stuff the same color as the headliner trim (the darker brown).
You can tell from the third pictures that I've still got the cockpit torn apart...lol.
I'm going to do the center posts and some of the other stuff the same color as the headliner trim (the darker brown).
You can tell from the third pictures that I've still got the cockpit torn apart...lol.
#26
#27
Join Date: Nov 2006
Location: Glasgow, Scotland UK
Posts: 47,302
Received 9,011 Likes
on
4,114 Posts
![Default](/forum/images/icons/icon1.gif)
![Name: car01.jpg
Views: 37
Size: 19.3 KB](https://www.jaguarforums.com/forum/attachments/interior-21/180753d1501306682-modding-your-jag-car01.jpg)
Hey MM.....just saw this thread and thought it looked great.
![Icon Imnotworthy](https://www.jaguarforums.com/forum/images/smilies/icon_imnotworthy.gif)
I think I and others would be pretty disappointed if you didn't do a proper "how to" write up complete with pics for the wood veneer and headlining at some point
![Icon Hunter](https://www.jaguarforums.com/forum/images/smilies/icon_hunter.gif)
Lookin forward to seeing them and adding them to the FAQ's.....no pressure....lol
#28
![Default](/forum/images/icons/icon1.gif)
Thanks for the compliments Jim, et al.
I was actually going to do that at some point, Jim. Would I do it on this thread, or would I start a new thread?
The guy I was supposed to be getting the veneer for the dash from seems to have disappeared off the face of the earth...good thing I didn't pay him up front for the veneer.![Icon Hunter](https://www.jaguarforums.com/forum/images/smilies/icon_hunter.gif)
So, I'm not sure, at this point, where I'll get the other veneer from, but I'm sure I'll find it somewhere. By the way, I'm almost done with the console and other small pieces with the burl on them. I'll do that write up and post pictures
when I get the lacquer (not to be confused with liquor) on the stuff I have done thus far.
I was actually going to do that at some point, Jim. Would I do it on this thread, or would I start a new thread?
The guy I was supposed to be getting the veneer for the dash from seems to have disappeared off the face of the earth...good thing I didn't pay him up front for the veneer.
![Icon Hunter](https://www.jaguarforums.com/forum/images/smilies/icon_hunter.gif)
So, I'm not sure, at this point, where I'll get the other veneer from, but I'm sure I'll find it somewhere. By the way, I'm almost done with the console and other small pieces with the burl on them. I'll do that write up and post pictures
![Icon Photo](https://www.jaguarforums.com/forum/images/smilies/icon_photo.gif)
#29
Join Date: Nov 2006
Location: Glasgow, Scotland UK
Posts: 47,302
Received 9,011 Likes
on
4,114 Posts
#30
![Default](/forum/images/icons/icon1.gif)
Nate. I still would check into the "band-it" company I mentioned. Their veneer is real wood and you can purchse preglued applied with household iron. It will conform to slight to moderate contours. Once glued it stays in place with no shrinkage! Very user friendly. If you go to Homie D or the other one, they carry the veneer in oak and melamine.
#33
#35
#37
![Default](/forum/images/icons/icon1.gif)
Nate heres another line on 1/8" and 1/4" stock, they may beable to order what you need.
http://www.woodcraft.com/Family/2005...ood-Packs.aspx
http://www.woodcraft.com/Family/2005...ood-Packs.aspx
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)