How To Edit Your Signature
#1
How To Edit Your Signature
If you like to change , edit your signature or have difficulties doing that ,this is a proper thread for you .
So, all you have to do is to follow these steps
1- Click on UserCP at the utmost left top of the page
2- You will see your options and see the image1 and click on Edit Signature button
3- In this new window, you can either upload a signature from your own computer or use other sites
For ex : I do use [ IMG] http:// [ /IMG] (no space between these tags )
After inserting these codes, click on Save signature
That's it
So, all you have to do is to follow these steps
1- Click on UserCP at the utmost left top of the page
2- You will see your options and see the image1 and click on Edit Signature button
3- In this new window, you can either upload a signature from your own computer or use other sites
For ex : I do use [ IMG] http:// [ /IMG] (no space between these tags )
After inserting these codes, click on Save signature
That's it
The following 8 users liked this post by Cadillac:
angel in va (03-28-2013),
EZDriver (02-06-2012),
jaguar driver (03-01-2014),
JD Jag06 (12-01-2014),
JimC64 (03-05-2012),
and 3 others liked this post.
#2
Puzzled...
Thanks, RegentV12. I already did that and uploaded a file from my PC (Option 2). Although that picture shows up in the "Your Current Profile Picture" box, somehow it doesn't show up under my signature in my post! I'm puzzled. I tried to insert the codes as you suggested, but wasn't able to do so. I guess I'll have to try using Option 1 and upload my photos to a website and then try again.
... So, I uploaded the picture I want to use under my signature from my PC to my Picasa Web Album. I opened my USER CP, clicked on Edit Profile Picture, opened the picture on my Picasa Web Album, copied the URL from that picture as a thumbnail and pasted it into Option 1. I added the tags before and after that URL and clicked on Save Changes. I got an error message: Invalid File. I did the same thing without the tags and got the same error message. All I could think of is maybe the file size was too big, so I shrunk it to 488 x 156 pixels (21111 bytes) (pretty small thumbnail) and tried again and got the same error message - Invalid File - both times, with and without the tags. Still puzzled and no ideas left. Your thoughts?
... So, I uploaded the picture I want to use under my signature from my PC to my Picasa Web Album. I opened my USER CP, clicked on Edit Profile Picture, opened the picture on my Picasa Web Album, copied the URL from that picture as a thumbnail and pasted it into Option 1. I added the tags before and after that URL and clicked on Save Changes. I got an error message: Invalid File. I did the same thing without the tags and got the same error message. All I could think of is maybe the file size was too big, so I shrunk it to 488 x 156 pixels (21111 bytes) (pretty small thumbnail) and tried again and got the same error message - Invalid File - both times, with and without the tags. Still puzzled and no ideas left. Your thoughts?
Last edited by Stuart S; 09-16-2011 at 07:56 PM. Reason: More info
The following users liked this post:
Stuart S (09-18-2011)
#4
Hey Stuart,
I am not familiar with Picasa but I think there is a mess up with the link codes . So, I got a image for you to take a look at and see correct coding method . I believe you should right click on the image that you wanna upload (not the whole link ) and see properties. Now, all you have to do is to copy and paste the link of the image between IMG tags
If you are still having difficulties you can also e-mail us or shot us a pm on your signature link , let's try to rectify it
Below is about two more extra images that I tell you about
I have got 2 more images that can illustrate you for better understanding
I am not familiar with Picasa but I think there is a mess up with the link codes . So, I got a image for you to take a look at and see correct coding method . I believe you should right click on the image that you wanna upload (not the whole link ) and see properties. Now, all you have to do is to copy and paste the link of the image between IMG tags
If you are still having difficulties you can also e-mail us or shot us a pm on your signature link , let's try to rectify it
Below is about two more extra images that I tell you about
I have got 2 more images that can illustrate you for better understanding
Last edited by Cadillac; 09-17-2011 at 04:41 AM.
The following users liked this post:
Stuart S (09-18-2011)
#5
#6
#7
Trending Topics
#8
The following users liked this post:
Stuart S (09-20-2011)
#13
#15
Join Date: Oct 2007
Location: PHX some of the time
Posts: 117,683
Received 6,338 Likes
on
5,523 Posts
#17
It's showing as:
__________________
Rob
https://www.jaguarforums.com/forum/ca...th-america-41/
98 XJ8 Topaz Metallic
01 BMW X5
76 911
What change do you want to make?
Graham
#18
Join Date: Oct 2007
Location: PHX some of the time
Posts: 117,683
Received 6,338 Likes
on
5,523 Posts
If you want to have something like this way to the Canada, Mexico & South America section.
Type what you want, copy the link you want to the clipboard, highlight the text you want to link then click the little globe with the paperclip and paste the url in the popup and you're done.
Type what you want, copy the link you want to the clipboard, highlight the text you want to link then click the little globe with the paperclip and paste the url in the popup and you're done.
#19
#20