XJ6 Improved Boot/Trunk Opening
For SaleExterior Body Parts
Description:
XJ6 S1-S2-S3
Boot/Trunk Opening Improvements (weak springs and 50% increase opening height)
- Spring Assist Kit, keeps Boot/Trunk open without a manual prop
- Extended Hinge Kit, allows Boot/Trunk to open an extra 50% ( from 42 degrees to 67 degrees-- 31" to 45")
Kits ordered now will be available late December early January .. Billing will occur when kits are ready to ship.
Domestic US Kits
1a. OEM Trunk Spring Assist Strut Kit (Single Strut)* $34 including S&H
1b. OEM Trunk Spring Assist Strut Kit (Dual Strut) $56 including S&H
2. 50% Extended opening Trunk Kit $146 including S&H
3. Extended Opening and Dual Spring Assist Kit $192 including S&H
* Not recommended if you are planning on using Extended Opening Kit
International Shipping will be $20-25 more
Please Ask questions if you are not sure which kits you need
· You will need to measurement of OEM hinge arm 5/16" hole above 2" side of trunk shelf 10 - ½", 11- ¼"or 11- 3/4" (push Lid to full open before measurement)(See Post #46 for how to measure)
See installation details in these two XJ6 S1, S2, S3 Forum Posts
XJ6 New and Improved Boot-Lid Hinge (concept) 22, 25, 30, 46, 50, 55, 62, 65, 67, 68
Trunk/Boot Lid Extension: Version 3-Concept Field Test- Jaguar Xj6L, Series 2
· Will need: Name, Shipping Address, Forum Nickname, Kit Number, Measurement
· Payment can be made by Bank Check or Pay Pal when kits are ready to ship to you
David McElroy, David84XJ6, PayPal davmcelroy@cs.com
Thank You for your Interest
Regards
David
XJ6 S1-S2-S3
Boot/Trunk Opening Improvements
1. Weak springs - Spring Assist Kit, keeps Boot/Trunk fully open to OEM height (28-32") without a manual prop
2. 50% Increased opening - Extended Hinge Kit, allows Boot/Trunk to open an extra 50% ( from 42 degrees to 67 degrees-- 31" to 46")
Thanks to Elinor's and Bill's installations, several dimensional differences between the XJ6 models have been sorted out
Hinge extension parts have been ordered from machine shop, and will be available 3rd week of January for shipment .
Billing will occur when kits are ready to ship.
We have 3 members that have show positive interest and 3 that are leaning. The final quantity can be adjusted if more members are interested
So please ask questions if you are interested in either solution, or both.
Thanks and Best Regards
David
Last edited by David84XJ6; 01-06-2020 at 11:04 PM. Reason: info clarification
Machined parts for Hinge Extensions kits, along with correct length and strength struts kits have been received and are ready to ship. First three kits with firm orders will go out this weekend. Three kits are unspoken for at this point, if you are interested, see Marketplace or send PM for detailed response to your specific XJ6 condition.
Thanks to all that participated
Rgds
David
Five Hinge Extensions kits, along with correct length and strength,struts kits have been successfully installed.
Two Hinge Extensions kits remain available from first production run.
If you are interested, send PM for detailed response to your specific XJ6 conditions, if you have weak boot/trunk springs causing lid to fall closed.
Thanks you to all that have participated
Rgds
David