Jaguar XJ 5.0L Supercharged Engine Parts - 2011 - Cheap
For Sale2011 Jaguar XJ
08-19-2022, 11:46 PM | Replies: 3 | Views: 540
Description:
I have many engine parts for the car except for the block and cylinder heads.
Car had 36,000 miles on it.
Picture | Title | Part Category | Price | Part Description |
---|---|---|---|---|
![]() |
OEM Fuel Injectors Bosch | Engine - Intake/Fuel | $165 | OEM Fuel Injectors Bosch |
![]() |
Engine Computer Brain Box MB279700-9450 P5 | Engine - Electrical | $160 | Engine Computer Brain Box MB279700-9450 P5 |
![]() |
Ignition Coil Pack OEM - Set | Engine - Electrical | $140 | Ignition Coil Pack OEM - Set |
![]() |
Electrical Wiring Harness OEM | Engine - Electrical | $130 | Electrical Wiring Harness OEM |
![]() |
CYLINDER HEAD COVERS OEM | Engine - Internals | $120 | CYLINDER HEAD COVERS OEM |
![]() |
Camshafts and Parts | Engine - Internals | $350 | Camshafts and Parts |
![]() |
ENGINE MOTOR PISTONS and Rods - 7 | Engine - Internals | $220 | ENGINE MOTOR PISTONS and Rods - 7 |
Last edited by awegrzyn; 08-19-2022 at 11:57 PM.
Reply
#2
![Default](/forum/images/icons/icon1.gif)
So quick obvious question. When I lower the prices to the point all these parts are the cheapest out there, and I have tons of them on eBay as the cheapest as well, and nobody is buying. Does that mean no one is rebuilding these engines?
I don't even have views on these parts. I will probably lower the prices until it sells, or scrap them.
I don't even have views on these parts. I will probably lower the prices until it sells, or scrap them.
#3
![Default](/forum/images/icons/icon1.gif)
In my 28.5 years as a technician, 10 of those years experience with Jags, the direct injection engines are incredibly difficult and time consuming to rebuild. I have not built one but, I’ve replaced many of the V6 & V8 DI engines. If I were you, I’d hold onto the valve covers, wiring harness, ignition coils and fuel injectors to sell. It is my understanding that the power train computer (PCM) can only be programmed to one vin and that’s it. Don’t take that as 100% gospel but, we had to replace one on a customers car with a new OEM PCM under advice from Autologic as a used PCM wasn’t going to work. I’ve broken a couple valve covers and fuel injectors trying to remove the injectors with the engine still in the car so I think you could sell those.