It does, with some guidance.

You first start the service routine for seat calibration. Then select the "read controller data" for the seats from within the calibration routine. You'll be given the choice of a dozen different seat configurations. I found you have to select your seat type, then read codes. Then you select the driver (passenger) seat calibrate routine, and execute it. It will clear adaptations (you'll have to reprogram the seat position into seat memory) and go through recalibration. When done, exit the routine, manually place the seat positions where you want them and press the memory button. If you don't select the seat type, the calibration will fail. BTW, it also set my mirrors to the neutral position, so I had to place them before pressing memory.

Second item: the AP200 reset oil interval routine did not work on my 4.2. I assume it's coded to work on the 5.0.

Hello senior member

I saw your post on Autel AP200 device. Can you please confirm that it has the possibility to reprogram the seat module on XK from 2007 since I need to do that on my car.

Thanks!
Neven