Well, here is my invoice. Paid in full using PayPal and lights are on their way. I do not expect night time driving, so no head or fog lights are being changed. Also, I am getting 5 bulbs for my custom Series 3 XJ stop light that we will install. Here is the complete list and notice the Forum Discount. Pretty expensive, but I believe the quality is better than I have seen anywhere else.

4Sight Automotive
Quicksilver Automotive
Jaguar S Type 1965

Product Code Quantity Price
233 5X5050 LED front sidelight bulbs
233-5050WhNeg 2 £ 9.98
380 High power LED stop/tail bulbs wh Neg Pair
380HPwhNegPr 1 £27.99
233 Multi LED bulbs for No Plate and luggage area wh Neg
233MultiLEDwhNeg 2 £9.98
382 High power LED bulb for reversing lights
382HPwhNeg 2 £27.99
36mm8med LED Festoon bulbs for int & glovebox
36mm8medLEDFes 4 £19.96
BA9ES LED dashlight bulbs green Neg
BA9ESgrNeg 10 £49.90
BA7 LED bulb for handbrake warning light wh Neg
BA7whNeg 1 £4.99
BA7 LED bulbs for O/D, flasher tell tales etc Green Neg
BA7grNeg 6 £29.95
Flasher kit with 4 bulbs and 3 pin electronic relay
FlKit3pin 1 £44.99
Classic maplight Green
Maplight 1 £19.99
501 LED compact bulbs 501CompWhNeg 5 £39.95

Shipping Method: By Weight (1st Class)

Subtotal: £245.72

Less forum discount £24.57

Total Tax: £NIL
Shipping: £26.48
Grand Total: £247.63

 

pretty exhaustive list you have there.

 

Hard part is waiting for the restoration to get to the point where installation can take place and we can light 'Miss Kitty" up.

 

yes, I would set shelves in the garage and start placing parts and instructions in order. I can only do one job at a time, and sometimes a 1-hour job can take 2 days, you know the story.

 

Understand. I have a parts wall in the garage for the used and replaced parts and have one inside for the new parts to be installed on Miss Kitty. Organization is critical to remain sane.

 

also a good idea to buy a box of zipper bags and a permanent marker; When one is disassembling and leaving screws and parts overnight it is easy to forget or misplace, if you know what I mean.

I bag everything as I disassemble, and mark it where it goes with notes. A little extra time to do but worth the time saved during reassembly.

when disconnecting electrical wires, I also fold a sticky label on each wire as I disconnect it, notating on the label where it was removed from, etc. Makes reconnection a breeze.