Panhard rod end fittings
#1
![Default](/forum/images/icons/icon1.gif)
During brakes bleeding, I have noticed that there are some end fittings missing at the outer end of the Panhard rod. The previous owner renewed the leaf springs and may have forgotten to tighten the end lock nut...
There is only the threaded end of the adjusting piece poking through the hole in the body bracket with a large cup washer on it. I have ordered some parts but unsure of the exact configuration regarding the distance tube. I don’t know if this is missing. It’s not visible. Should it go through the hole in the body bracket as a sort of sleeve over the adjusting piece?
Would be grateful for your help,
Dave
There is only the threaded end of the adjusting piece poking through the hole in the body bracket with a large cup washer on it. I have ordered some parts but unsure of the exact configuration regarding the distance tube. I don’t know if this is missing. It’s not visible. Should it go through the hole in the body bracket as a sort of sleeve over the adjusting piece?
Would be grateful for your help,
Dave
Thread
Thread Starter
Forum
Replies
Last Post
Kasper Lundberg Lykkegaard
MKI / MKII S type 240 340 & Daimler
2
03-25-2021 07:13 AM
vandenplas408
XJ XJ6 / XJR6 ( X300 )
1
01-08-2014 04:19 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)