Restoration af a MK2 3.8 1960
#22
06-10-2013 | 03:36 PM
Hi there
going a little bit forward with the front suspension assembly:
German: Restaurierung eines 1960er Jaguar MK II 3.8: Montage Vorderachse
and Google translated
Regards,
Oliver
going a little bit forward with the front suspension assembly:
German: Restaurierung eines 1960er Jaguar MK II 3.8: Montage Vorderachse
and Google translated
Regards,
Oliver
#23
06-23-2013 | 11:12 AM
Hi there!
Not so good weather means work on sunday:
Restaurierung eines 1960er Jaguar MK II 3.8: Achsschenkelmontage
and here the Google Translated version
Not so good weather means work on sunday:
Restaurierung eines 1960er Jaguar MK II 3.8: Achsschenkelmontage
and here the Google Translated version
#24
07-08-2013 | 01:25 PM
Hi!
I started to finish the front suspension and disassembly the steering:
Restaurierung eines 1960er Jaguar MK II 3.8: Endmontage Vorderachse - Demontage Lenkung
Google translated, english version
I started to finish the front suspension and disassembly the steering:
Restaurierung eines 1960er Jaguar MK II 3.8: Endmontage Vorderachse - Demontage Lenkung
Google translated, english version
#25
07-29-2013 | 03:16 PM
Hi!
One step more close to the finish line :-)
Restaurierung eines 1960er Jaguar MK II 3.8: Lenkgetriebe
or the Google Translated version
One step more close to the finish line :-)
Restaurierung eines 1960er Jaguar MK II 3.8: Lenkgetriebe
or the Google Translated version
#26
08-02-2013 | 06:12 PM
Senior Member
Joined: Dec 2011
Posts: 936
Likes: 193
From: London
The following users liked this post:
ollibee (08-03-2013)
#27
08-25-2013 | 09:24 AM
Hi Guys
After a short time of summer holidays, I did go forward with the rear axle:
- German version
- English version
After a short time of summer holidays, I did go forward with the rear axle:
- German version
- English version
#28
09-23-2013 | 12:57 PM
#29
10-14-2013 | 01:06 PM
Veteran Member
Joined: Mar 2007
Posts: 11,386
Likes: 642
From: Planetarium
The following users liked this post:
ollibee (10-15-2013)
#30
10-15-2013 | 11:37 AM
#31
11-17-2013 | 10:53 AM
Hi!
I had some time to spend on the Overdrive and the gearbox:
Google translated and the german version.
Regards
Oliver
I had some time to spend on the Overdrive and the gearbox:
Google translated and the german version.
Regards
Oliver
#32
12-01-2013 | 11:05 AM
Hi!
The disassembly of the gear box is done!
See here the german Version
and here the Google Translated
The disassembly of the gear box is done!
See here the german Version
and here the Google Translated
#33
12-09-2013 | 03:23 PM
Hi guys
Going forward with small steps:
German Version,
Google translated English version
Regards,
Oliver
Going forward with small steps:
German Version,
Google translated English version
Regards,
Oliver
#34
12-28-2013 | 04:11 AM
Hi!
Some parts of the clutch were overhauled and the next will be the overdrive:
German Version, Google translated Version doens not work today. I don't know why.....
Regards,
Oliver
Some parts of the clutch were overhauled and the next will be the overdrive:
German Version, Google translated Version doens not work today. I don't know why.....
Regards,
Oliver
#35
01-05-2014 | 06:13 AM
Hi there!
The front casing assembly of the overdrive is done:
Here the German version and here the translated version made with online translator.
Regards,
Oliver
The front casing assembly of the overdrive is done:
Here the German version and here the translated version made with online translator.
Regards,
Oliver
#36
02-03-2014 | 11:42 AM
Hi!
A small review of body work on the drivers side:
- german Version
- horrible translated by onlie translator
Regards,
Oliver
A small review of body work on the drivers side:
- german Version
- horrible translated by onlie translator
Regards,
Oliver
#37
02-04-2014 | 05:54 AM
Joined: Dec 2011
Posts: 120,461
Likes: 16,877
From: Durham, UK
The following users liked this post:
ollibee (02-05-2014)
#38
03-02-2014 | 10:29 AM
Hi,
I made some work on the current regulator.
German version and the online translated version
Regards,
Oliver
I made some work on the current regulator.
German version and the online translated version
Regards,
Oliver
The following users liked this post:
MK2 (03-02-2014)
#39
03-10-2014 | 05:21 AM
Hi!
I hade some times to rebuild the clutch and brake master cylinders.
Original version in german,
online translated version.
Regards,
Oliver
I hade some times to rebuild the clutch and brake master cylinders.
Original version in german,
online translated version.
Regards,
Oliver
The following users liked this post:
JeffR1 (02-05-2016)
#40
03-31-2014 | 01:19 PM
Hi guys
Servo unit is done!
German version: Restaurierung eines 1960er Jaguar MK II 3.8: Bremskraftverstärker
and the online translated version http://translate.google.ch/translate...html&sandbox=1
Regards,
Oliver
Servo unit is done!
German version: Restaurierung eines 1960er Jaguar MK II 3.8: Bremskraftverstärker
and the online translated version http://translate.google.ch/translate...html&sandbox=1
Regards,
Oliver