whats up all! , im relatively new to this forum but i've read a lot of useful threads. i own a 2000 jag xj8 vdp , love the car, i've had it for about 2yrs now no major problems up until about a month ago. i started the car pulled from garage drove down ally and car shut off, it displayed engine stalled . i restarted and drove about 5 feet did the same thing . me and a friend pushed car back to garage cause it no longer would start anymore . i bought a scanner to see was there any codes stored. i had a code for a crank sensor and a knock sensor . i bought and installed and also installed new spark plugs. i started car and success it fired right up ran for about ten mins and engine stalled again! i jumped on the net found a thred that said something about cleaning throttle body so i did . it worked drove car for about a week everything was good, until the other day i was on my way to work and the car stalled out again. i go thru the motion of restarting it did a few times but kept stalling out i get the car towed back home. this time when i scanned i got some new codes p1111, p1367, p1368, p1000, and p0351 thru po358 . i looked up the codes found po351 thru po358 was all the coils . found that to be strange that all coils would fail at the same time. is that possible or does something else control power to the coils . please help me as i have run out of options to try