2008 X-type 3.0 Error Codes P0352 P0354 P0356, & P1368
#1
2008 X-type 3.0 Error Codes P0352 P0354 P0356, & P1368
Hi everybody. I'm a new member. First time posting but i've frequent this forum. Up until recently, my car has been flawless. Now I'm getting multiple error codes. up to 12 codes at a time but P0352 P0354 P0356, & P1368 are consistent. I understand them to mean bank 2 (left) is having misfires. I've checked for vacuum leaks. change upper & lower intake manifold gasket, IMT gaskets, and chased down the wiring all the way back to the ECM and didn't find bad wires. P1368 says a Ignition amplifier, bank 2 could be a problem. Does this car have an ignition amplifier or does the single come from the ECM?
An interesting fact is when i clear the codes at a high rev, the engine runs fine until i let off of the accelerator and then re-accelerate. then it goes back to running poorly. which leads to me it'as not a vacuum leak.
Any help is appreciated.
An interesting fact is when i clear the codes at a high rev, the engine runs fine until i let off of the accelerator and then re-accelerate. then it goes back to running poorly. which leads to me it'as not a vacuum leak.
Any help is appreciated.
Last edited by dbourg; 03-11-2019 at 01:02 PM. Reason: Added more details
#2
Welcome to the forum dbourg,
Good to have you with us at Jaguar forums.
A re-post in X-Type forum will get this to the attention of members with the same model. Follow this link https://www.jaguarforums.com/forum/x-type-x400-14/ to the X-Type forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the US Southern Midwest Region forum by following this link https://www.jaguarforums.com/forum/u...rn-midwest-67/ to find other members in your region.
Enjoy the forums.
Graham
Good to have you with us at Jaguar forums.
A re-post in X-Type forum will get this to the attention of members with the same model. Follow this link https://www.jaguarforums.com/forum/x-type-x400-14/ to the X-Type forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the US Southern Midwest Region forum by following this link https://www.jaguarforums.com/forum/u...rn-midwest-67/ to find other members in your region.
Enjoy the forums.
Graham
#3
Join Date: Jan 2014
Location: Delaneys Creek,Qld. Australia
Posts: 28,381
Received 6,327 Likes
on
4,370 Posts
#4
Join Date: Mar 2014
Location: Tehama County, California, USA
Posts: 25,656
Received 9,463 Likes
on
5,466 Posts
#5
#6
Join Date: Mar 2015
Location: Dural, Northwest Sydney. Australia.
Posts: 40,678
Received 4,054 Likes
on
2,909 Posts
#7
Join Date: Oct 2007
Location: PHX some of the time
Posts: 117,785
Received 6,357 Likes
on
5,533 Posts
Welcome to Jaguar Forums dbourg,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Trending Topics
#8
Join Date: Apr 2012
Location: Summerville, South Carolina
Posts: 24,814
Received 4,331 Likes
on
3,741 Posts
#9
I still have not found the problem. Can any of you tell me the significance on the ECM number? I found many that should fit by application but the part number varies a bit. I need JAG# 8X43-10K975-AA (DENSO MB079700-9670). Will any fit by application and will they work without reprogramming?
#10
Thread
Thread Starter
Forum
Replies
Last Post
JHenry313
X-Type ( X400 )
3
09-23-2021 11:04 AM
mystype04
S-Type / S type R Supercharged V8 ( X200 )
15
04-11-2019 08:46 AM
blackhonor9
XJ XJ8 / XJR ( X308 )
9
04-04-2015 05:03 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)