Mark this thread as Unsold
[FS] 2003 XJR parts car
#21
No worries or judgement from me. I have a longer horizon. If you find time to get out there and can pull it off or your friend is feeling up to it, I would be grateful. Send me an email if you do and we can work out a fair price. Kindly, -M
#25
Parts
Hello. Sorry about your Jag. I am looking for the drivers door window switch. If your car had the memory seats it will work just fine. I am up in Canada and if you can ship it with your USPS what would work perfect. Let me know and I will pay with PayPal and send my address also. Any chance that the front headlight made it through with out damage? I need just the light itself.
Thanks
Paul
Thanks
Paul
#26
Hey, I have not been to the car in a couple of weeks, maybe more. I will pull up this thread when I go where the car is again and see what is available.
The driver door switch pack is in my garage. It works great but the two front buttons, that control the front door windows, do not illuminate. There is a way to put new bulbs in it but for now they are burned out. Not sure if you still want it...
Headlights are probably toast. I will see if any parts survived when I go back.
The driver door switch pack is in my garage. It works great but the two front buttons, that control the front door windows, do not illuminate. There is a way to put new bulbs in it but for now they are burned out. Not sure if you still want it...
Headlights are probably toast. I will see if any parts survived when I go back.
#27
Parts you have for sale?
Hi. Sorry about the car. I was a victim of the same type of accident. So I know how you feel. Do you have the original lug nuts, bumper chrome panels front and rear, inside trunk light trim located on the underside of the carpeted trunk lid and finally drivers side front an rear window weather trim?
Please let me know. Thanks
Please let me know. Thanks
#28
Update: the next time I'll have a chance to go and actually pull parts off the car will be next Wednesday or Thursday (1 week from now).
Once again because of my time constraints I am lowering the price for the WHOLE car. Remember the engine, transmission and differential are all good, as are the seats along with a host of sensors and relays and trim pieces and body panels and etc. etc. etc. Some things have already been taken but what's left is certainly worth more than 1K.
$1,000.00 and come load it up.
Once again because of my time constraints I am lowering the price for the WHOLE car. Remember the engine, transmission and differential are all good, as are the seats along with a host of sensors and relays and trim pieces and body panels and etc. etc. etc. Some things have already been taken but what's left is certainly worth more than 1K.
$1,000.00 and come load it up.
#33
Is this what you are referring to?
This is among the parts I pulled and put on the shelf in my garage. Is this what you are looking for?
#34
AGD Oatmeal
Drivers side door card....
That's the shadow of my head at the bottom center, not discoloration of the door. lol
That's the shadow of my head at the bottom center, not discoloration of the door. lol
#36
If your trim is SDZ & you have the passenger seat belt square bezel available, I will take it. Let me know, thanks !
Edit :
It's part #5 in the diagram below.
Edit :
It's part #5 in the diagram below.
Last edited by King Charles; 07-14-2017 at 09:06 PM.
#37
Not sure what the latest is on your car for parts, but I'm looking for wood trim to replace on my front doors (GND3120?). I have a 2003 XJR R1 we just picked up last week that needs a little love.
#39
Rear Bearing hub carriers
Hello;
Thank you for the great deal on the SLCM It's in the car working great.
Would you have the rear bearing hub carriers?
I need both left and right.
They are the large silver parts that the rear shafts go through. It houses the rear wheel bearings.
Mine are rust-welded in and I need to replace the rear wheel bearings.
I'm hoping to get 2 used ones, put new bearings in, and install on the car.
Also, Need the EVAP purge valve that is located in the center part of the engine compartment against the fire wall.
Thank you for the great deal on the SLCM It's in the car working great.
Would you have the rear bearing hub carriers?
I need both left and right.
They are the large silver parts that the rear shafts go through. It houses the rear wheel bearings.
Mine are rust-welded in and I need to replace the rear wheel bearings.
I'm hoping to get 2 used ones, put new bearings in, and install on the car.
Also, Need the EVAP purge valve that is located in the center part of the engine compartment against the fire wall.
Last edited by Rpach10115; 08-10-2017 at 02:59 PM.
#40
I agreed to a price for the rest of the car with a gentleman a couple of weeks ago. He is working out the logistics of picking it up. When he has paid me and picked up the car I will confirm on here that it's officially gone.
If for any reason he changes his mind I'll look into some of the parts listed above.
Rpach10115 -- I am very happy the part worked out for you. It's possible I have a used Evap purge valve in my garage somewhere. I had one that worked fine about a year ago and I don't remember getting rid of it. I suspect it's still in there somewhere.
If for any reason he changes his mind I'll look into some of the parts listed above.
Rpach10115 -- I am very happy the part worked out for you. It's possible I have a used Evap purge valve in my garage somewhere. I had one that worked fine about a year ago and I don't remember getting rid of it. I suspect it's still in there somewhere.