I have a '98 XJ8 that needs to be repowered. Nikasil issue!! I have decided that if I repower it I will be throwing away money so I have decided to part it out. The book value is just not there. Let me know if you are interested in any thing in particular and make me a fair offer.

 

is the slm or slcm thing ok? if so id like to buy it.its the thing under the fuse box in the trunk..please contact me at (ctx19@hotmail.com)

 

Hello Sean,

Here are the back seat heater parts as I said in my pm to you saying that I would post the pictures here. Let me know if this is what you are looking for.

Thanks ---- Chris

 

Is the third brake light available?

 

Also looking for the splitter bar in the lower grille.

 

The third brake light is available. I guess a fair price would be $40.00 for it. As far as the splitter bar I am sure it is there but I am not exactly sure what it is. I will look closer tomorrow to try and figure out what you are referring to. Maybe if you can take a picture of what it is you are looking for I can give you a better answer and give you a cost. Thanks for your interest ------ Chris

FOLLOW UP: I believe that I know what you are looking for. Here are a few pictures of it on the Jaguar as well as removed, and the front grill of the Jaguar after removal. It is in good shape just needs to be cleaned. I would take $30.00 for it plus whatever shipping cost to you.

 

Hello I am looking for the computer under the front driver seat. I had ordered one from Tx and he has sent the switch on the side of the seat WRONG. I had paid $45. for it and that is fine. My xj is a 95
and it should work. I can get the part number but it is probably not the same because of the year. Please let me know.
PAUL

 

Hello Paul,

It is still there and you are welcome to have it. How about $50.00 shipped to you. I think $5.00 to ship from North Carolina to Canada is about right. I will remove it today and send you a picture of it to make sure it is what you are needing. Thanks for your interest and let me know if you need anything else.

Chris Helbing

 

TN8Shooter,

Here are the pictures of the splitter vane and the third brake light. As I said in my PM to you I am 99% sure this is what you are looking for.

Best regards ------ Chris

 

How much would you want for your front orange maker lights? I am in the UK and am Sean B's friend so you could send them with his stuff.

Ta,
Stu.

 

Are the rear hub and carrier assemblies the same as an XK8? If so how much do you want for the drivers side (LH)?

 

Hi Stu1986,

I would say $15 each for the side marker lights and $25 for the front marker lights. The driver side front marker light does have a crack in the lens however. No pieces of the lens are missing but the cracks are evident when you look at it.

Thanks for your interest ------- Chris

 

Hi MexK8,

I believe that the hub assemblies were the same from '97 to '02 on the XJ8's and XK8's. As far as the carrier, I am not sure what you are asking for. Can you send me a picture or two of what it looks like and exactly what you need?
As far as cost make me a fair offer.

Thanks for your interest ------ Chris

 

Hello Chris. This is Paul again. Do you have the power aerial still? I just bent mine so bad that I need to replace it. I think the whole aerial assembley is easyest. What do you need for it?
Also what do you need for the two outside front headlights? Mine are fine but the 98 has a better light pattern. I have HID bulbs for them.
Thanks
Paul

 

Hi Paul,

I do still have the aerial mast and it does work. It does have a very slight bend to the mast however leaning backward towards the rear of the car. It is not a single spot where it is bent just a slight curvature if that makes sense. Again it does work like it should, it just is not perfect. I guess I would take $50 for it. The headlight assemblies I would take $100 for the pair of either high or low beams. I would do $160 for the headlight assemblies in their entirety for the pair, both high and low beams left and right side. On a different note your seat module is on its way but I did a little research after I dropped it in the mail to you and I am afraid it is not going to work because of the wiring harness not being the same. I believe that you need to have a LNA2165AD module and not the LNC2160AD that I sent you. I checked the other Jags that I have and I do not have the 2165 unfortunately. If it turns out that it does not work though just return it to me and I will refund you your money. No sense in you having a part that you can't use. Let me know when you get it though Paul and I hope that it does work. Also let me know if you want to the mast or headlights.

Again my thanks and best regards ------- Chris

 

Hi Sean,

Heater Parts went out yesterday morning. They are on their way.

Thanks ---- Chris

 

Do you have the cover ( with the cup holder ) for the center console. If so what is the color of the interior?

 

Wayne,

Here are the pictures of the driver seat and center console lid. Let me know what you think.

Best regards ---- Chris

 

Wayne,

Here are a few more of the center console that I could not attach to the other reply, file size to big.

Again my thanks ----- Chris

 

Stu,

Here are the pictures of the side marker lights.

Again cheers ------- Chris