**official** intake elbow group buy thread
#201
![Default](/forum/images/icons/icon1.gif)
Mafioso has been trying to get a stock fitting for it but the company wants mass quantities ordered. I have had mine split once. I bought a new one as its a standard PCV fitting for a Ford 5.4L and is found in most Auto parts stores help section. I put the hose clamp on and have not had a problem since. If you are worried about it get a spare and carry a screw driver with you in case it goes while you are on a trip. I did the drive to the meet with no problems with mine and that was with some spirited driving coming back.
The following users liked this post:
bfsgross (06-24-2011)
#202
#203
#206
#208
Join Date: Nov 2006
Location: Glasgow, Scotland UK
Posts: 47,302
Received 9,011 Likes
on
4,114 Posts
#209
#211
#212
#213
#215
![Default](/forum/images/icons/icon1.gif)
^ Yep. I have the basic black, with a K&N drop in. Works great. Just don't get carried away with the oil. I've been using K&N's for 15 years or so on all my vehicles without a problem. I like the washability factor. The oil thing is a bit overblown IMHO. But let's not get that going again or this thread will go off the rails.
#216
![Default](/forum/images/icons/icon1.gif)
Broncobra, ditto to Chris on the K&N a/f. As mentioned, only lightly oil after cleaning, avoid saturating by allowing the oil to permeat through the fibers before applying more oil. The drop in K&N and Mafioso air intake elbow is a big plus to breathing. Do a 3 lb. pulley and low temp thermo, then unplug her butt with hi-flow cats, x-pipe, replace stock center resonator with a pair of flow through resonators, dump it all out of a pair of Borla's...and you tell us how this made a difference?
#217
![Default](/forum/images/icons/icon1.gif)
Broncobra, ditto to Chris on the K&N a/f. As mentioned, only lightly oil after cleaning, avoid saturating by allowing the oil to permeat through the fibers before applying more oil. The drop in K&N and Mafioso air intake elbow is a big plus to breathing. Do a 3 lb. pulley and low temp thermo, then unplug her butt with hi-flow cats, x-pipe, replace stock center resonator with a pair of flow through resonators, dump it all out of a pair of Borla's...and you tell us how this made a difference?
The following users liked this post:
bfsgross (10-14-2011)
#219