S-Type / S type R Supercharged V8 ( X200 ) 1999 - 2008 2001 - 2009
Sponsored by:
Sponsored by:

A/C was fixed now this..

Thread Tools
 
Search this Thread
 
  #41  
Old 09-22-2016, 07:34 AM
aholbro1's Avatar
Veteran Member
Join Date: Aug 2010
Location: Decatur, TX
Posts: 4,615
Received 1,642 Likes on 1,068 Posts
Default

Originally Posted by clubairth1
Maybe this is the TSB for the compressor not cooling?
.
.
.
Yes, that is the one I was thinking of.
 
  #42  
Old 09-23-2016, 09:51 AM
uptwobucks's Avatar
Member
Thread Starter
Join Date: Jun 2010
Location: TX
Posts: 67
Received 2 Likes on 2 Posts
Default

Originally Posted by abonano
That's good.

Now put 12V to the actual pump and listen for it to run... There is a + & - market onto the pump connector.
The pump does run when I put 12 volts to it.
 
  #43  
Old 09-23-2016, 09:57 AM
uptwobucks's Avatar
Member
Thread Starter
Join Date: Jun 2010
Location: TX
Posts: 67
Received 2 Likes on 2 Posts
Default

Originally Posted by clubairth1
Maybe this is the TSB for the compressor not cooling?
.
.
.
If that valve were malfunctioning, I would think there would not be cold air at all. Right? The passenger side is very cold.
 
  #44  
Old 09-23-2016, 10:03 AM
uptwobucks's Avatar
Member
Thread Starter
Join Date: Jun 2010
Location: TX
Posts: 67
Received 2 Likes on 2 Posts
Default

Originally Posted by abonano
Many 02 and prior HVAC modules have shorted out... It's easier to pull it out and check vs. replacing the DCCV. Considering you already had replaced your DCCV I would check that climate circuit board.

Remember, Jaguar dealerships replace with new parts. They won't troubleshoot down to a burnt track on the circuit board.

As soon as this rain gives me a break, I will pull the CM and take pictures of the circuit board and post them. Maybe I'm overlooking something.
 
  #45  
Old 09-23-2016, 10:15 AM
uptwobucks's Avatar
Member
Thread Starter
Join Date: Jun 2010
Location: TX
Posts: 67
Received 2 Likes on 2 Posts
Default

Originally Posted by aholbro1
Maybe I misunderstand the problem. Sounds to me like your gripe is that with full cold selected on both sides, you get hot air out of the driver's side vents once you increase turns above idle, while cold air continues to emanate from the passenger side vents. Once returned to idle, the driver's side begins to cool off, returning to full cold as long as you leave the engine at idle. Correct?

If so, you don't have a refrigerant circuit problem. (Cold air is produced and delivered to your pax-side vents)
You don't have a coolant circulation pump problem. (hot coolant is delivered to the appropriate section of the heater core to produced heated air at the driver's side vents)

At full cold, one task of the climate control module is to command the water valve to keep both sides closed to prevent coolant flow to the heater core. (I suspect, but not having the V-8, don't care enough to look it up - that it also commands the coolant circulation pump to "off")
The task of the water valve (DCCV) is to keep both outlets to the heater core closed as commanded by the climate control module.

Enjoy playing with your coolant pump, but make sure you reserve some time to diagnose your real problem.
Without removing the DCCV, Is there a way to eliminate the DCCV to see if it is the problem, or a way to stop the hot water from flowing to the heater core to see if it resolves the issue?
 
  #46  
Old 09-23-2016, 11:06 AM
Join Date: Oct 2007
Location: PHX some of the time
Posts: 117,463
Received 6,326 Likes on 5,512 Posts
Default

Clamps on the hoses will do the trick.

Originally Posted by uptwobucks
If that valve were malfunctioning, I would think there would not be cold air at all. Right? The passenger side is very cold.
No, you get reduced cooling at idle and more as engine speed increases.
 
The following users liked this post:
uptwobucks (09-26-2016)
  #47  
Old 09-23-2016, 11:31 AM
clubairth1's Avatar
Veteran Member
Join Date: May 2009
Location: home
Posts: 9,296
Received 2,408 Likes on 1,894 Posts
Default

Right. Read the TSB as Norri says.
.
.
.
 
The following users liked this post:
uptwobucks (09-26-2016)
  #48  
Old 09-26-2016, 04:30 PM
uptwobucks's Avatar
Member
Thread Starter
Join Date: Jun 2010
Location: TX
Posts: 67
Received 2 Likes on 2 Posts
Default

Originally Posted by Norri
Clamps on the hoses will do the trick.



No, you get reduced cooling at idle and more as engine speed increases.

The a/c compressor was changed last year. I read where some of the newer units did not have that issue and some did not have that spring behind the compressor. We have had 4 days of rain, and my car is outside, so I'm still delayed for working on it. I will look at it soon as this rain breaks.
 
  #49  
Old 09-26-2016, 05:04 PM
Join Date: Oct 2007
Location: PHX some of the time
Posts: 117,463
Received 6,326 Likes on 5,512 Posts
Default

That's right, it may not have the valve if it's a new unit, but it's a two minute check.
 
  #50  
Old 09-26-2016, 07:43 PM
Gus's Avatar
Gus
Gus is offline
Veteran Member
Join Date: Jul 2008
Location: Berlin Md.
Posts: 11,341
Received 2,213 Likes on 1,702 Posts
Default

I recently had a similar no A/C at idle with my 2000 SType 3.0 and found that my battery was the issue and I found it by accident. Replaced it and all was good. Have your battery and charging system checked. Also check your cabin filter.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
carzaddict
XF and XFR ( X250 )
27
09-19-2023 11:09 AM
detonator
X-Type ( X400 )
9
09-04-2016 09:57 AM
Gerry755
S-Type / S type R Supercharged V8 ( X200 )
4
08-31-2016 07:49 AM
Harry Peter Rose
X-Type ( X400 )
4
08-29-2016 06:28 PM
Bret_T
F-Type ( X152 )
12
08-27-2016 08:29 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: A/C was fixed now this..



All times are GMT -5. The time now is 07:49 AM.