S-Type / S type R Supercharged V8 ( X200 ) 1999 - 2008 2001 - 2009
Sponsored by:
Sponsored by:

Codes for rear suspension bushings

Thread Tools
 
Search this Thread
 
  #1  
Old 09-28-2023, 01:05 AM
ruxi2k's Avatar
Junior Member
Thread Starter
Join Date: Jul 2023
Location: Brasov
Posts: 9
Received 0 Likes on 0 Posts
Default Codes for rear suspension bushings

Hello,
Please help me with 2 codes for the rear suspension bushings at the shock absorber at the bottom and at the lower arm. I circled them in red in the picture. Thank you very much for your help.
 
  #2  
Old 09-28-2023, 07:06 AM
S-Type Owner's Avatar
Veteran Member
Join Date: Feb 2018
Location: The wilds of Montana
Posts: 1,751
Received 645 Likes on 505 Posts
Default

By "code" I am assuming that you mean "part number". The part number for the shock bush is C2D4013. The bushing for the lower control arm does not appear to be listed separately, though they may be available in the aftermarket.

There are two versions of the lower control arm, pre and post initial facelift, the break comes at MY 2002.5... I believe Moog in the States makes one version, but their parts listing system is incorrect as I recall.

Also, when you find time, please stop by the New Members forum and post the expected "introduction"; this will help you to achieve more forum privileges. The new members forum can be found here:

New Member Area - Intro a MUST - Jaguar Forums - Jaguar Enthusiasts Forum
 

Last edited by S-Type Owner; 09-28-2023 at 07:10 AM.
The following users liked this post:
ruxi2k (09-28-2023)
  #3  
Old 09-28-2023, 01:39 PM
ruxi2k's Avatar
Junior Member
Thread Starter
Join Date: Jul 2023
Location: Brasov
Posts: 9
Received 0 Likes on 0 Posts
Default

Thank you very much for your answer.
Yes, you are right... part number, not code.
For the lower arm, I ordered a bushing yesterday that was too small, it was probably for the pre-2002 version.
Best regards!
 
  #4  
Old 10-05-2023, 08:29 AM
ruxi2k's Avatar
Junior Member
Thread Starter
Join Date: Jul 2023
Location: Brasov
Posts: 9
Received 0 Likes on 0 Posts
Default

Hello,
I changed the shock absorber bushing and it fit perfectly.
I couldn't find the bushing for the lower arm. I think the solution is to change the whole lower arm.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JBRoberts
XJS ( X27 )
2
07-08-2023 02:50 PM
Dj5ivestar
XF and XFR ( X250 )
4
02-23-2019 10:02 AM
Wingrider
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
6
08-28-2017 05:17 AM
philc850
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
3
08-13-2015 11:34 PM
TonyX
X-Type ( X400 )
14
02-12-2011 09:32 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Codes for rear suspension bushings



All times are GMT -5. The time now is 07:46 AM.