Fuel Pressure sender?
#1
12-29-2021 | 09:12 AM
Thread Starter
|
Junior Member
Joined: Nov 2013
Posts: 6
Likes: 1
From: Borrego Springs CA
Fuel Pressure sender?
While doing some work on my 3.0 I noticed that the vac line from the fuel pressure sender wasn't connected to anything. Its the small red lead from the sender.
I looked for a corresponding hose to connect it to but couldn't find anything. Where does it connect to??
Pictures?
I looked for a corresponding hose to connect it to but couldn't find anything. Where does it connect to??
Pictures?
#3
12-29-2021 | 12:55 PM
Veteran Member
Joined: Oct 2012
Posts: 4,510
Likes: 2,107
From: Oregon
Take a look here, on pages 29 and 30:
http://www.jagrepair.com/images/Elec...troduction.pdf
The training manual says the IP sensor (Injector Pressure) has a line connected to the intake manifold. Sorry I don't have a more specific location for you.
http://www.jagrepair.com/images/Elec...troduction.pdf
The training manual says the IP sensor (Injector Pressure) has a line connected to the intake manifold. Sorry I don't have a more specific location for you.
#4
12-29-2021 | 01:24 PM
Thread Starter
|
Junior Member
Joined: Nov 2013
Posts: 6
Likes: 1
From: Borrego Springs CA
Take a look here, on pages 29 and 30:
http://www.jagrepair.com/images/Elec...troduction.pdf
The training manual says the IP sensor (Injector Pressure) has a line connected to the intake manifold. Sorry I don't have a more specific location for you.
http://www.jagrepair.com/images/Elec...troduction.pdf
The training manual says the IP sensor (Injector Pressure) has a line connected to the intake manifold. Sorry I don't have a more specific location for you.
The following users liked this post:
kr98664 (12-29-2021)
Thread
Thread Starter
Forum
Replies
Last Post
iconic
XJ XJ6 / XJR6 ( X300 )
9
06-01-2016 11:44 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)