When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi,
I have a 2003 S Type 3.0. I recently replaced the valve cover gaskets and plugs and when I was pulling off the intake manifold, one of the electrical connectors on the back of it broke. It is one of the intake manifold air valve connectors. Does anyone know where I could find a new one? I tried to make it work, but got a check engine light right away and it looks like it is because of that. Or, can anyone point me in the direction of a diagram that would help me locate the part number?
Thank you.
I think I figured it out. Looking at photos of the IMT valve and looking at the locators on them, its the WPT-545. I ordered a couple, hopefully that should be it.
Intake Manifold Tuning or Valve Electrical Connector
Realize this is an old post but struggled with this myself recently and can confirm it is a Motorcraft part number WPT-545 for anyone who may be in the same boat down the road. These connectors are widely used on early 2000's model fords. Found it on Amazon (as well as other places). Don't bother searching for a Jag part# or part description.
Here are some pics with the old connector and the new side by side.