Leaper Trunk badge instead of SType???
#1
Leaper Trunk badge instead of SType???
Need opinions. I like doing different things to my car to make it unique, and my eyes keep telling me something needs to be done in the a*s end area. I have been trying to figure something out and I may have come up with it. I havent completely thought this through so tell me if it a dumb idea, but one thing is for certain, for some reason, I do not like the "S TYPE" badge on the rear left of the trunk. So I was thinking of taking it off and just adding a leaper like the new XF's have in the center of the trunk lid. So basically I would have the leaper on the left side (jumping left) and the "R" on the right side. Nice clean look. If you dont like the leaper idea, any other nice Jag badges you can think of? Regardless, I think its time for the SType to get a move on! Thoughts?
#4
#5
Just an FYI for anyone else thinking about doing this. The OEM leaper that comes on the center trunk lid of the XF is 16cm. This is TOO big for the left side of the SType, the section where the badge would go is only approx 5 inches or @13cm. The only option here is to get the smaller one, made for the fenders. www.adamesh.co.uk has them. They are 8 cm long or approx 3 inches.
I have not determined yet if the smaller 3 inch leaper would look good where the SType badge is. It may be too small. Considering just one of these things is $32 shipped, I would hate to do trial and error and throw that money down the drain if it doesnt look right.
I have not determined yet if the smaller 3 inch leaper would look good where the SType badge is. It may be too small. Considering just one of these things is $32 shipped, I would hate to do trial and error and throw that money down the drain if it doesnt look right.
#6
Just an FYI for anyone else thinking about doing this. The OEM leaper that comes on the center trunk lid of the XF is 16cm. This is TOO big for the left side of the SType, the section where the badge would go is only approx 5 inches or @13cm. The only option here is to get the smaller one, made for the fenders. www.adamesh.co.uk has them. They are 8 cm long or approx 3 inches.
I have not determined yet if the smaller 3 inch leaper would look good where the SType badge is. It may be too small. Considering just one of these things is $32 shipped, I would hate to do trial and error and throw that money down the drain if it doesnt look right.
I have not determined yet if the smaller 3 inch leaper would look good where the SType badge is. It may be too small. Considering just one of these things is $32 shipped, I would hate to do trial and error and throw that money down the drain if it doesnt look right.
#7
Trending Topics
#10
#12
#14
#15
Thanks man, the badge actually looks alot better in person now that I'm looking at the pics. I believe all STR's have smoked tailights, someone correct me if I'm wrong. I have some new rear turn signal bulbs to get rid of that amber "egg yoke" look. Look silver when off but flash amber when on. Regarding the exhaust, the huge STR resonators were taken out, and welded new pipes and resonators on it, just cat back. Pretty damn loud.
#16
Thanks for the pics Bull, that's hot right there. I love the look of the tips as well as what you did with the exhaust system. I know what you're talking about when you mention the orange bulbs, i already swapped them out to chromes as well, and it's a day and night difference on the look vs. the orange glaring look. Also wanted to smoke the tail lights along with the side markers, but didn't want to go all out dark so the cops won't bother. But that's something I'm still debating on doing, however i do like the look of the smoked lights.
#18
#19
#20
I guess I can look into one of those thin supercharged emblems that are on the XK I believe and put it on the left side. We will see how it looks once i get the new R badge on there. The purpose of doing this was to clean up the rear a little bit if it looks "unbalanced" thats a problem.