Need help with S Type push in compartment by radio
#23
#26
![Default](/forum/images/icons/icon1.gif)
I removed my unit and it is easy just remove your cover “D” on both sides and the one at the bottom and you will find bolts under them. Now to remove the unit you will need to put your shifter in “D” to do that. Do not pull on the unit hard because you have wire in the back for the radio and heat & a/c. I removed the shifter ball to make the job easier. I hope this helps.
I guess I was a day late and a dollar short on this one….
I guess I was a day late and a dollar short on this one….
Last edited by Gus; 01-23-2012 at 08:45 AM.
#27
![Default](/forum/images/icons/icon1.gif)
I removed my unit and it is easy just remove your cover “D” on both sides and the one at the bottom and you will find bolts under them. Now to remove the unit you will need to put your shifter in “D” to do that. Do not pull on the unit hard because you have wire in the back for the radio and heat & a/c. I removed the shifter ball to make the job easier. I hope this helps.
I guess I was a day late and a dollar short on this one….
I guess I was a day late and a dollar short on this one….
#28
Join Date: Oct 2007
Location: PHX some of the time
Posts: 117,321
Received 6,310 Likes
on
5,497 Posts
![Default](/forum/images/icons/icon1.gif)
It should, have a look here https://www.jaguarforums.com/forum/s...003-faq-36719/
this is the later car but I believe that it is the same set up.
this is the later car but I believe that it is the same set up.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)