Rear window regulator replacement specifics
#1
![Default](/forum/images/icons/icon1.gif)
There are good write-ups available here, and I have done the job before, but I am going to do the repair on my daughter's car without having the opportunity to bring tools with me and she doesn't have many tools. So, I need to gather as much specific information as I can so that I can purchase only those items needed. If I recall, it is a very short list. I ordered a regulator with motor so can avoid the worst of the repair.
Is this right?
Philips screwdriver for screws under door handle pad.
Flat tool to remove door panel.
Wrench to remove stud and nuts (all 12 M?)
Small Philips or similar to push out plastic pins from sleeves.
Is that all?
Thanks in advance
Is this right?
Philips screwdriver for screws under door handle pad.
Flat tool to remove door panel.
Wrench to remove stud and nuts (all 12 M?)
Small Philips or similar to push out plastic pins from sleeves.
Is that all?
Thanks in advance
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)