Fresh new look for the XJ6L
#1
Fresh new look for the XJ6L
I have removed the satin pearl wrap. The car had been resprayed before and an old style (crap) clear coat was used and pulled up when removing the vinyl. Getting ready for the priming to even it out, then will be applying Avery Black Pearl. I've already done the passenger doors. ALL of the stainless trim is out to powdercoat satin black to match the wheels & grille. The list includes bumper trim, all door trim, rails, quarter window, antenna nut, front & back glass trim. It should come out awesome.
Ready for primer
Too many peaks and valleys, the imperfections show through the wrap so we are using a layering primer, then will block sand it smooth.
Avery SW900 Justin Pate Black Pearl Gloss Vinyl
Ready for primer
Too many peaks and valleys, the imperfections show through the wrap so we are using a layering primer, then will block sand it smooth.
Avery SW900 Justin Pate Black Pearl Gloss Vinyl
#4
Veteran Member
#7
Trending Topics
#11
#12
Veteran Member
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)