When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi, I am trying to fix my bodged up boot lock which has arrived today but
it may as well be a bunch of 0' and 1's.
I am not sure how to put this together in order for my existing key to work. I would really appreciate any assistance. Possible YouTube clips would be great
Note that the Jaguar key has an 8 rather than 6 digit code. There don't appear to be 24 wafers in the pack so I guess it's designed to pick up on only some of the key cuts, or am I missing something?
I doubt Jag made keys that are all 1's, all 2's and all 3's, so that is 21 discs. Jag owners would go "WTF?" and not "Cool!" when presented the keys by the Jag dealer.
Also each key will have at least one 1, 2 or 3, so that is 18 discs.
Hi, I am getting even more confused. Do the latest comments mean that I have purchased the wrong thing? I have taken the plastic covers off and am just about to have a look at what is left of the original lock.
I have found a YouTube clip of a guy putting together a ford boot lock which is similar but obviously not the same. If anybody has info regarding the building of the lock I will be indebted for life
I can't find the maximum recurrence for a particular cut, but assuming 4 (mine has 4 instances of a '2' cut) then 12 wafers, 4 of each, will cover all combinations.
I have taken the old barrel out and it has been slightly abused. Was quite pleased with myself as I managed to do this without breaking anything.
I am planning to put together the new one tomorrow. However, as previously stated I have no instructions or reference material on how to assemble this type of lock. There are lots of parts that have come with the new barrel and I am not too sure where many of them go.
Thank you for your assistance fellas. It has helped a lot, Zack
Hi, I have been pi##ing about with the lock for the best part of the day and have got nowhere really. I have dyspraxia which isn't helping with working out the key configuration and then the placing of the Discs. There also seems to be a metal pin missing. I have one but the diagram that I was very grateful to receive
shows two.
Zen and the art of boot lock maintenance. Well I've only gone and done it. I feel like making a rather emotional speech (thank you to all who have supported me along the way etc...). It only took around 7 hours and I still have to put plastic covers back but I have managed to build the lock and it works. It is a little stiff so I will add some grease but I now have a boot lock.
The car is at the painters next week so I will get him to tidy it up and with a new badge, it should be ok