F type front number plate
#1
#2
Join Date: Feb 2014
Location: Adelaide, South Australia
Posts: 8,493
Received 3,247 Likes
on
2,394 Posts
#3
![Default](/forum/images/icons/icon1.gif)
![](https://cimg6.ibsrv.net/gimg/www.jaguarforums.com-vbulletin/854x445/e1_51c0c283cfa899a10433c958aeeb2ebe4cd22f50.jpg)
![](https://cimg8.ibsrv.net/gimg/www.jaguarforums.com-vbulletin/854x445/e1_e336000e91d69fd7b2f8422541718300eaed08d7.jpg)
#4
The following 2 users liked this post by DPelletier:
Burt Gummer (11-08-2017),
KalamazooJag (09-20-2021)
#5
The following users liked this post:
Burt Gummer (11-08-2017)
#6
#7
Trending Topics
#9
Join Date: Feb 2014
Location: Adelaide, South Australia
Posts: 8,493
Received 3,247 Likes
on
2,394 Posts
#11
#12
The following users liked this post:
powerhouse (11-12-2017)
#14
![Default](/forum/images/icons/icon1.gif)
My car came from california and spent 2 years and 15,000 miles there with no front plate on it. I do not know how many fines were paid by the previous owner if any.
In my current state I use a sto-n-sho purchased directly from STO N SHO Removable Quick-Release Front License Plate Bracket
Very fast shipping, 100% satisfied with the quality.
In my current state I use a sto-n-sho purchased directly from STO N SHO Removable Quick-Release Front License Plate Bracket
Very fast shipping, 100% satisfied with the quality.
#15
![Default](/forum/images/icons/icon1.gif)
Good to know. I've been running no front plate here in WA for the last 5 years but hadn't been pulled over yet. So far so good...
#16
![Default](/forum/images/icons/icon1.gif)
Yes thanks that's exacting it, might go for a vinyl stick on or like your picture, measurements would be great, might fit lower down either
Last edited by powerhouse; 11-12-2017 at 07:04 AM.
#17
The following users liked this post:
powerhouse (11-13-2017)
#18
![Default](/forum/images/icons/icon1.gif)
Ok Bruce, i'm putting on no number plate surround, just fitting the smaller rectangular plate with double sided tape to the cross bar, So as i said i just want it 5mm above and below the bar, so what size would that be. You say yours are 10cm and 25mm, the cross bar must be small
#19
The following users liked this post:
powerhouse (11-16-2017)
The following users liked this post:
powerhouse (11-17-2017)