Mark this thread as Unsold
[WTB] Series 3 Oil pressure switch Fittings.
#1
Series 3 Oil pressure switch Fittings.
Hi, I am looking for this set of fittings including the banjo bolt for a series 3
XJ6
Please let me know if you have one and are willing to sell it.
Rusty.
XJ6
Please let me know if you have one and are willing to sell it.
Rusty.
#2
Try sending an email to David at everyday XJ.
If you cant find it...and since it's pressure not flow you can use a drill press and make your own in about 30 min. For the banjo...Drill from the bolt tip shy of of head and then a cross drill to intersect the first operation. Same for the block using a piece of alu bar and a 1/4 in NPT tap for the fittings.
If you cant find it...and since it's pressure not flow you can use a drill press and make your own in about 30 min. For the banjo...Drill from the bolt tip shy of of head and then a cross drill to intersect the first operation. Same for the block using a piece of alu bar and a 1/4 in NPT tap for the fittings.
Last edited by icsamerica; 11-26-2017 at 10:16 AM.
The following users liked this post:
Rustyxjc (11-26-2017)
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)