Dent removel
#1
#2
![Default](/forum/images/icons/icon1.gif)
There is a guy at Harbor Freight that will do it for $ 14.99
https://www.harborfreight.com/crossb...kit-66957.html
https://www.harborfreight.com/crossb...kit-66957.html
#3
![Default](/forum/images/icons/icon1.gif)
If you live in El Paso then it would be closer to find someone in Southern California to repair your car than Houston.
Just sayin'
bob
Last edited by motorcarman; 12-31-2017 at 08:30 AM.
The following users liked this post:
Jhartz (12-31-2017)
#4
#5
![Default](/forum/images/icons/icon1.gif)
Yeah, I've asked paintless dent removal guys if they could do the work on my Mercedes ML, they almost always say that the dent is in a place where the steel is too thick for them to be able to straighten it. Most paintless dent removal guys will do a job like that for under 50-60 bucks anyway. Show it to a local guy to see if he would tackle the job. Then you could be relatively confident that the 14 dollar guy can do it.
#6
Join Date: Feb 2013
Location: Trying to escape Central Florida
Posts: 4,700
Received 1,807 Likes
on
1,324 Posts
![Default](/forum/images/icons/icon1.gif)
That Harbor Freight stuff is for soft dents (slight inclusions), rarely, if ever, does it work on sharp dents (small hail, car doors). Plus you'll probably have to take it to the dent guys anyways to complete it to a smooth finish. I took mine to a local dealer to use their dent guys (outsourced at that shop). They do it all day long there and haven't complained about not being able to get my PO's stuff punched out.
#7
Trending Topics
#8
![Default](/forum/images/icons/icon1.gif)
bob
The following users liked this post:
Jaguarstyper (01-01-2018)
#9
The following users liked this post:
motorcarman (01-01-2018)
Thread
Thread Starter
Forum
Replies
Last Post
haroldleggett
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
25
01-11-2011 10:53 PM
H20boy
US Southwest
4
08-12-2009 05:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)