Hose cracked.
#3
I see that 205 people have viewed your question and don't know what it is that you are looking at. This is a case where a picture would be most helpful. Since we don't have one I am going to do some guessing and see if I can help.
My first guess is you are standing in front of the vehicle and are looking at the camshaft cover closest to you.
My second guess is the hose in question is the one on the right hand side of the front camshaft cover. How am I doing so far?
If my guesses are correct you are looking at a hose about 3/4 to 1 inch in diameter. That hose is the PCV breather hose. If it is smooth you need the updated ribbed one. See below, I have attached a picture of the hose from Jagbits website, a forum sponsor.
If my guesses are incorrect then post a picture and we can solve the question.
My first guess is you are standing in front of the vehicle and are looking at the camshaft cover closest to you.
My second guess is the hose in question is the one on the right hand side of the front camshaft cover. How am I doing so far?
If my guesses are correct you are looking at a hose about 3/4 to 1 inch in diameter. That hose is the PCV breather hose. If it is smooth you need the updated ribbed one. See below, I have attached a picture of the hose from Jagbits website, a forum sponsor.
If my guesses are incorrect then post a picture and we can solve the question.
#4
I see that 205 people have viewed your question and don't know what it is that you are looking at. This is a case where a picture would be most helpful. Since we don't have one I am going to do some guessing and see if I can help.
My first guess is you are standing in front of the vehicle and are looking at the camshaft cover closest to you.
My second guess is the hose in question is the one on the right hand side of the front camshaft cover. How am I doing so far?
If my guesses are correct you are looking at a hose about 3/4 to 1 inch in diameter. That hose is the PCV breather hose. If it is smooth you need the updated ribbed one. See below, I have attached a picture of the hose from Jagbits website, a forum sponsor.
If my guesses are incorrect then post a picture and we can solve the question.
My first guess is you are standing in front of the vehicle and are looking at the camshaft cover closest to you.
My second guess is the hose in question is the one on the right hand side of the front camshaft cover. How am I doing so far?
If my guesses are correct you are looking at a hose about 3/4 to 1 inch in diameter. That hose is the PCV breather hose. If it is smooth you need the updated ribbed one. See below, I have attached a picture of the hose from Jagbits website, a forum sponsor.
If my guesses are incorrect then post a picture and we can solve the question.
#7
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post
Rob_hook
XJ XJ8 / XJR ( X308 )
4
11-25-2014 11:20 PM
donberry
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
2
07-28-2014 10:20 AM
FastKat
XJ6 & XJ12 Series I, II & III
2
02-14-2014 09:08 AM
Michael Star
S-Type / S type R Supercharged V8 ( X200 )
2
01-30-2013 09:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)