When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I’m in the midst of a 4 speed overdrive manual gearbox conversion on one of my Series 1’s. Can anyone tell me (or post an image) where the gearbox vent is supposed to be attached? It’s the only thing I’m not entirely sure about and I can’t find any pictures on-line. The parts manual doesn’t differentiate between Right and Left Hand Drive cars - both have a 2 hole mount - as does mine which is from a RHD car.
BTW mine is a LHD car but I would also be interested in seeing where a RHD car’s vent is mounted as well.
Thanks!
~Mike
the red rectangle is the mount that I'd like to see installed
Never mind - figured it out. Here is a pic of the mount attached to rearmost exhaust manifold studs for the archives in case anyone else wonders about this in the future.
there it is attached to the rearmost manifold studs on an E-type
Hi again - for the archives I'm uploading this image shared by someone from Jag-Lovers who has a legit, factory LHD XJ6 with manual trans. Shows the vent location just like E-type, attached the exhaust manifold studs
A real LHD XJ6 with factory manual showing the vent tube location