When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The sway bar poly bushings are larger but not a big deal . Andy makes vertical links on the outer points that somehow without looking back at the geometry improve cornering .
Does anyone know if I can bolt of a X308 to an X300 using X308 links?
In the thread Lady P linked to, Andy (XJRengineer) says the X308 sway bars use drop links with metric studs, but the XJ40/X300 use drop links with Imperial studs. You might have to somehow adapt the X300 drop links to the holes in the X308 bar, but I don't know if that might mean drilling a larger hole in the bar or if a spacer of some sort might be required to prevent the stud from rattling around in the hole. Andy may know.