JLR SDD
#1
Jlr sdd
Hidy folks. Ragman here from Chesapeake, VA. I wanted to put it out there that I have picked up a JLR SDD ODBII Reader and software from GB. If you are in the area and have a code that you need read, I'll do what I can to help you out. The Jag dealer here in VAB runs $140 an hour with a three hour estimate to start with. I will charge you nothing as long as I can help. I don't drink often, but I can say that I'd not decline a 12-pack of Killian's or Blue Moon. Not required, but I'll ensure to offer my thanks a smile. As a retired Army SGT, I'm prone to helping military and their families. You can reach me on here. I have all the tech manuals and troubleshooting guides. I an not a Jag tech, but I'm learning from my issues and would like to be able to learn from helping others. Ride hard!
Last edited by ragman1171; 07-22-2014 at 12:26 PM.
The following users liked this post:
sklimii (07-21-2014)
#2
The following users liked this post:
ragman1171 (07-21-2014)
#3
Ragman,
We may know each other from another life, Goodbuddy.
But here's the question you might be able to answer and save me hours of scouring this forum:
I have an '04 XJR and recently purchased a Mongoose (clone) with software. What software version do I need to read my codes.
Thanks in advance.
We may know each other from another life, Goodbuddy.
But here's the question you might be able to answer and save me hours of scouring this forum:
I have an '04 XJR and recently purchased a Mongoose (clone) with software. What software version do I need to read my codes.
Thanks in advance.
The following users liked this post:
GGG (07-21-2014)
#5
.
]Ragman,
We may know each other from another life, Goodbuddy.
But here's the question you might be able to answer and save me hours of scouring this forum:
I have an '04 XJR and recently purchased a Mongoose (clone) with software. What software version do I need to read my codes.
Quite possibly!
The JLR SDD software that I got in my kit is what I use.
Thanks in advance.[/QUOTE]
We may know each other from another life, Goodbuddy.
But here's the question you might be able to answer and save me hours of scouring this forum:
I have an '04 XJR and recently purchased a Mongoose (clone) with software. What software version do I need to read my codes.
Quite possibly!
The JLR SDD software that I got in my kit is what I use.
Thanks in advance.[/QUOTE]
#6
There has been a lot of discussion in the https://www.jaguarforums.com/forum/g...-33347/page20/ thread on SDD versions.
Graham
The following users liked this post:
ragman1171 (07-22-2014)
#7
My Mongoose (clone) came bundled with SDD 134 version 5.04 on 3 DVD's.
There has been a lot of discussion in the https://www.jaguarforums.com/forum/g...-33347/page20/ thread on SDD versions.
Graham
There has been a lot of discussion in the https://www.jaguarforums.com/forum/g...-33347/page20/ thread on SDD versions.
Graham
Thread
Thread Starter
Forum
Replies
Last Post
trosty
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
26
12-18-2022 06:40 PM
hafren
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
1
09-07-2015 10:30 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)