Can anything other than tie rods cause this...
#1
Can anything other than tie rods cause this...
2002 Xtype 2.5 manual 166k mi on the odo.
Right front wheel has a TON of play when lifted off the ground and rocked at 3 and 9 o'clock.
12 and 6 are rock solid.
Feels just like a tie rod but is tons worse and the tie rod seems to not be moving, like it is the pivot point.
The whole hub/spindle assy is moving as a unit.
I just put on a new axle and control arm because looking at it when I rocked it there was a lot of movement at the ball joint. No change.
When I spin the wheel I don't hear any noise from the wheel bearing.
Right front wheel has a TON of play when lifted off the ground and rocked at 3 and 9 o'clock.
12 and 6 are rock solid.
Feels just like a tie rod but is tons worse and the tie rod seems to not be moving, like it is the pivot point.
The whole hub/spindle assy is moving as a unit.
I just put on a new axle and control arm because looking at it when I rocked it there was a lot of movement at the ball joint. No change.
When I spin the wheel I don't hear any noise from the wheel bearing.
#2
#3
Join Date: May 2008
Location: Great Mills, MD
Posts: 14,431
Likes: 0
Received 3,915 Likes
on
3,217 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Woznaldo
XJ6 & XJ12 Series I, II & III
9
09-26-2015 11:02 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)