Clamp part numbers
#1
![Default](/forum/images/icons/icon1.gif)
Hello;
i am going to have my thermostat hose replaced at the shop this weekend (already tried that once myself, no thanks) and I have also ordered a new OEM tank and tank-to-block hose for good measure, since they do typically fail, I am looking for the OEM part numbers for the original clamps, as I don’t want regular store brand clamp replacements.
thanks!
i am going to have my thermostat hose replaced at the shop this weekend (already tried that once myself, no thanks) and I have also ordered a new OEM tank and tank-to-block hose for good measure, since they do typically fail, I am looking for the OEM part numbers for the original clamps, as I don’t want regular store brand clamp replacements.
thanks!
#4
#6
![Default](/forum/images/icons/icon1.gif)
![](https://cimg3.ibsrv.net/gimg/www.jaguarforums.com-vbulletin/718x718/i1zz6hb_c87e195f6079b600f4ee4dea66296e021c0b13d8.jpg)
Just got a set from a NAPA store last weekend when I replaced my puke tank; brought in the olde ones and they matched them right up, two bucks and change for the pair.
Be sure that you point the jaws towards the front of the engine bay, not up towards the hood. If the jaws point up, the hood liner will hit them, and eventually break the nipple on the tank.
Last edited by wa3ra; 07-13-2018 at 04:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Fishfoolbear
XJ XJ8 / XJR ( X308 )
5
02-23-2015 03:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)