Message centre quit!
#1
#4
I'd try 2 things. First, I'd try (w/key in position II) hitting the reset button on the light switch. Then press the turn signal stalk button a couple of times. Secondly, I'd try going into diagnostic mode. Press and hold the light stalk button, turn key from 0 to II for 3-4 seconds min. If it goes into "test" mode, cycle through the read outs then turn off key and back to "II" & see if it now works.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)