My old Volvo friends say that the X-Type makes me too "gangsta"...
#3
#4
They're just H&Rs and wheels are 20x8.5 and 20x9.5 ET40 with 235/30/20 on all corners. I may trim half a coil from the front at some point. Needs to be a finger lower in the front. In my 15+ years of doing this, the golden rule is that all front aftermarket springs need a half coil trimmed. This is no exception.
#7
Trending Topics
#8
#9
#10
#11
Yes. With ET40 and 235s, you don't need to modify anything. As a member of stanceworks though, the additional fender overhang I still have and "not low enough" ride height is still a little embarrassing for me. I need spacers and coilovers or airbags.
#12
#13
That's so tempting
I just love the way you have fitted these 20's without them looking out of place. Might try this one too this summer... Are both front and rears ET40?
When you're loaded up (eg: 4 adults), do you get any rubbing?
And what's the brand of your wheels?
Thanks!
I just love the way you have fitted these 20's without them looking out of place. Might try this one too this summer... Are both front and rears ET40?
When you're loaded up (eg: 4 adults), do you get any rubbing?
And what's the brand of your wheels?
Thanks!
#14
#16
I agree, you need that coilover/tuck look, however its sooooooo soooo hard to do on these cars without spending TONS of money....there is essentially no references because there aren't many people with our "tastes" if you will, driving around jaguars. I plan on getting coils and modifying the arms to make more room for a wider wheel with lower offsets. But first I need to pony up for a set of wheels that are going to cost me 4-6k. Im thinking Weds or Work.
#18
#19
I agree, you need that coilover/tuck look, however its sooooooo soooo hard to do on these cars without spending TONS of money....there is essentially no references because there aren't many people with our "tastes" if you will, driving around jaguars. I plan on getting coils and modifying the arms to make more room for a wider wheel with lower offsets. But first I need to pony up for a set of wheels that are going to cost me 4-6k. Im thinking Weds or Work.