Overhaul!
#1
![Default](/forum/images/icons/icon1.gif)
Hi this Onielle from Ghana. I have a V6 X-type AWD 2003, GB.
Was parked for 5yrs before I acquired it.
Water pressure pump was busted; replaced.
Changed another rusty pipe from the fore water pump.
Engine runs amazing except it's been shaking at cold start, plugs on my mind.
Oil seeps through the manifold, I'm still struggling to get the exact PCV valve to replace.
There are a few electrical issues as well.
Doors open as soon as you lock them.
I manually lock doors everytime.
Driver door open indicator is constantly on, lights beneath the door as well at night only.
Instrument cluster works periodically and stops completely till next start up.
But engine is solid.
There's a slight oil build up around the top head plate. I intend to change the seals possibly gaskets to get everything in sync.
Question?
I want to purge the engine whilst at it.
Good idea or nah?
Was parked for 5yrs before I acquired it.
Water pressure pump was busted; replaced.
Changed another rusty pipe from the fore water pump.
Engine runs amazing except it's been shaking at cold start, plugs on my mind.
Oil seeps through the manifold, I'm still struggling to get the exact PCV valve to replace.
There are a few electrical issues as well.
Doors open as soon as you lock them.
I manually lock doors everytime.
Driver door open indicator is constantly on, lights beneath the door as well at night only.
Instrument cluster works periodically and stops completely till next start up.
But engine is solid.
There's a slight oil build up around the top head plate. I intend to change the seals possibly gaskets to get everything in sync.
Question?
I want to purge the engine whilst at it.
Good idea or nah?
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)