Paddle Shifter Extensions/Larger Paddles for Jaguar XE
#21
10-10-2023, 07:32 AM
anyone?
#22
10-10-2023, 01:34 PM
If possible... I know this is kinda infringing... but I would like the cad drawings for a set. Just the paddles. OR someone can send me a set of paddles for 3D scanning. I would like to 3D print in carbon fiber with the light pipes in them so the + and - light up.
anyone?
anyone?
We stopped making them because it was extremely difficult to get the machining right on the hole for the pins, and we ended up needing to use stronger springs, which some people complained about. If you can produce for us in Carbon this might be a possibility.
__________________
Stuart Dickinson
Managing Director
VelocityAP Industries Ltd.
O: (1)250-485-5126
E: Stuart@VelocityAP.com
www.velocityap.com
Stuart Dickinson
Managing Director
VelocityAP Industries Ltd.
O: (1)250-485-5126
E: Stuart@VelocityAP.com
www.velocityap.com
The following users liked this post:
Panthro (12-28-2023)
#23
10-10-2023, 02:05 PM
Senior Member
Send me an email - Stuart@VelocityAP.com
We stopped making them because it was extremely difficult to get the machining right on the hole for the pins, and we ended up needing to use stronger springs, which some people complained about. If you can produce for us in Carbon this might be a possibility.
We stopped making them because it was extremely difficult to get the machining right on the hole for the pins, and we ended up needing to use stronger springs, which some people complained about. If you can produce for us in Carbon this might be a possibility.
#24
10-11-2023, 01:33 PM
Send me an email - Stuart@VelocityAP.com
We stopped making them because it was extremely difficult to get the machining right on the hole for the pins, and we ended up needing to use stronger springs, which some people complained about. If you can produce for us in Carbon this might be a possibility.
We stopped making them because it was extremely difficult to get the machining right on the hole for the pins, and we ended up needing to use stronger springs, which some people complained about. If you can produce for us in Carbon this might be a possibility.
#25
11-04-2023, 07:39 PM
Send me an email - Stuart@VelocityAP.com
We stopped making them because it was extremely difficult to get the machining right on the hole for the pins, and we ended up needing to use stronger springs, which some people complained about. If you can produce for us in Carbon this might be a possibility.
We stopped making them because it was extremely difficult to get the machining right on the hole for the pins, and we ended up needing to use stronger springs, which some people complained about. If you can produce for us in Carbon this might be a possibility.
#26
11-21-2023, 09:48 AM
Thread
Thread Starter
Forum
Replies
Last Post
Stuart@VelocityAP
F-Type ( X152 )
131
02-05-2022 04:40 PM
Stuart@VelocityAP
XJ ( X351 )
37
07-10-2018 04:06 PM
Stuart@VelocityAP
F-Pace (X761) / C-X17
4
05-03-2018 11:14 AM
Stuart@VelocityAP
XF and XFR ( X250 )
3
04-16-2018 06:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)