DIY AJ126 aluminium pipes and supercharger coupler
#1
DIY AJ126 aluminium pipes and supercharger coupler
Thanks to informations gathered on this forum I was able to change on my own the cooling pipes and the supercharger isolator.
Parts:
1) Upgraded Metal Coolant Water Pipe System Kit 3.0 280 USD, ebay
2) solid supercharger coupler isolator uprated X260 43 GBP, ebay
3) intake gaskets, oil cooler gasket
4) expansion tank venting hose, circa 40 USD
It took about 1 week, 2 - 4 hours per day with no rush and a lot of head scratching.
I highly advise having a low profile torx T30 key and a low profile 1/4 ratchet (also for T30 socket)
Parts:
1) Upgraded Metal Coolant Water Pipe System Kit 3.0 280 USD, ebay
2) solid supercharger coupler isolator uprated X260 43 GBP, ebay
3) intake gaskets, oil cooler gasket
4) expansion tank venting hose, circa 40 USD
It took about 1 week, 2 - 4 hours per day with no rush and a lot of head scratching.
I highly advise having a low profile torx T30 key and a low profile 1/4 ratchet (also for T30 socket)
Last edited by Pepix; 06-29-2024 at 12:24 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)