Finally ZF trans remap! Need all your help
#21
Actually the 8 speed ZF has a LOT more stuff for it than the 6 speed. What people forget is once the the 8 speed ZF was installed in the Hellcat the aftermarket went wild releasing upgraded parts. Unless your into American muscle most don't realize to what level these cars are being built to?
Hellcats are routinely built to 1500HP and beyond so they do crazy stuff like twisting drive shafts in two and busting rear axles because of the vast amount of power they are putting down.
Here is one shop that builds these tremendous ZF 8 speeds. Note the power ratings listed. yea-1350 ft-lb of torque at the crank! They are WAY beyond anything a modified Jaguar has ever put out. If your really serious I would have a talk with them before doing anything or ordering any parts. Note at the bottom of their ad it says :
"Parmount Performance Products also produce high performance transmission solutions for foreign platforms as well."
Built 8 Speed ZF Transmissions
.
.
.
Hellcats are routinely built to 1500HP and beyond so they do crazy stuff like twisting drive shafts in two and busting rear axles because of the vast amount of power they are putting down.
Here is one shop that builds these tremendous ZF 8 speeds. Note the power ratings listed. yea-1350 ft-lb of torque at the crank! They are WAY beyond anything a modified Jaguar has ever put out. If your really serious I would have a talk with them before doing anything or ordering any parts. Note at the bottom of their ad it says :
"Parmount Performance Products also produce high performance transmission solutions for foreign platforms as well."
Built 8 Speed ZF Transmissions
.
.
.
You didn't read the 6 sp is putting 1700+WHP (2000HP crank) through it? That is a lot more than the 1500HP crank that the hellcats are putting out through the 8sp.
Bottom line, ALL of the hellcats running faster than 8's are replacing their ZF8 with a liberty or lenco trans. The ZF6/6sp's are still keeping theirs and getting faster.
#22
The following 3 users liked this post by Benjamin Jerome Smith:
#23
The following users liked this post:
User 42324 (04-04-2024)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)