Installed Carbon Eye Lids and Front Splitter
#1
#4
#5
#6
My favorite color combo is carbon fiber on white so slowly all the little chrome pieces will be carbon fiber. And yes i got them from Mina right off their website. Im waiting for them to release the carbon side mirrors because i want to have to wrap as few parts as possible.
The following users liked this post:
sherbercars (03-11-2015)
#7
Its weird because in the pictures im not a fan of the eye lids but in person i absolutely love them! No nothing screws on the all come with 3M double sided tape that you just peel and stick. I wasnt too sure how i felt about the fact that its only held by tape but yesterday when i was installing the lip i messed up one of them slightly and had to take it off and re-position it was a pain in the *** getting it to unstick from the car so im not worried any more. I reapplied the tape and put it on properly.
Trending Topics
#8
Dude....people are going say some things on this forum...rather than not...your mods look great ! ..keep going .
The following users liked this post:
Mark239 (03-12-2015)
#10
Today i managed to wrap the chrome piece at the bottom of the headlight as well.
The following 2 users liked this post by Mark239:
Gpalace (03-12-2015),
sherbercars (03-12-2015)
#11
I love the way your splitter looks! i wish there were more options besides just the Mina ones even though i like them alot.
#12
Good job on the spliters is tht real C/F or rapped , etherway looks greate.BL
#13
Now that looks even better , did you mean wrap or real .BL
#15
The following users liked this post:
sherbercars (03-15-2015)
#16
#17
Whoa I just noticed the chrome piece built into the headlights is carbon too.....did you wrap that with carbon vinyl? I like it
#18
i tried looking for that piece but i knew there was slim to non chance that i can get it by itself especially in carbon fiber so yes i used 3m carbon wrap and wrapped it. it was much easier than i thought since if you take a knife and push on it from the back it pops out just enough that you can wrap over it and behind the edges
#19
Ive considered doing it in white but im a huge fan of carbon fiber and in my opinion carbon fiber on white is the best color combo but itll look much better once my carbon side vents and mirrors come in and when i wrap the blades in the front and but a black grille on it.
The following users liked this post:
sherbercars (03-15-2015)
#20
i tried looking for that piece but i knew there was slim to non chance that i can get it by itself especially in carbon fiber so yes i used 3m carbon wrap and wrapped it. it was much easier than i thought since if you take a knife and push on it from the back it pops out just enough that you can wrap over it and behind the edges
Thanks for the tip!