O2 Sensors...

Reply Subscribe

Thread Tools

Search this Thread

#21

03-22-2015 | 02:58 PM

thestorm

Junior Member

Joined: Oct 2014

Posts: 2

Likes: 0

Quote:

Originally Posted by thestorm

Hello, I'm fairly new to this forum, but I can bring some information as I work on all types of vehicles as a hobby and also a owner of a 2013 3.0 AWD. My check engine light came on as well around 7k miles. I ran the code and it stated that sensor 3 bank 2 heater is bad code p0162. to make a long story short I attached an interesting document.

I read the document as only 23% were good. the rest are a bad batch.
*Both sensor 3 bank 1 and 2 are easy to change its the other 4 that may add a little difficulty and pricey labor cost if you don't change them yourself.

Reply Like

#22

02-28-2023 | 03:12 PM

Jagboi64

Veteran Member

Joined: Jan 2013

Posts: 4,915

Likes: 3,228

From: Calgary, Canada

Quote:

Originally Posted by thestorm

*Both sensor 3 bank 1 and 2 are easy to change its the other 4 that may add a little difficulty and pricey labor cost if you don't change them yourself.

Sorry to bring up an old thread, but I have had the same code, also on a 2013 AWD 3.0. Where is the Bank1, sensor 3 sensor located? I'm guessing access is from under the car?

Reply Like