Proper XF 'Launch Control' ?
#1
Proper XF 'Launch Control' ?
Not that I would ever have the need to do this... But i'm curious:
What is the proper method of launch control?
[ul][*]Dynamic mode or DSC OFF ?[*]foot on the brake then jump on the gas when the light turns green[*] OR[*]one foot on the brake, the other on the gas "power braking" at xxx? RPM, then release the brake
[/ul]i just dont know how far to push it...
What is the proper method of launch control?
[ul][*]Dynamic mode or DSC OFF ?[*]foot on the brake then jump on the gas when the light turns green[*] OR[*]one foot on the brake, the other on the gas "power braking" at xxx? RPM, then release the brake
[/ul]i just dont know how far to push it...
#2
RE: Proper XF 'Launch Control' ?
ORIGINAL: Randy
Not that I would ever have the need to do this... But i'm curious:
What is the proper method of launch control? [ul][*]Dynamic mode or DSC OFF ?[*]foot on the brake then jump on the gas when the light turns green[*] OR[*]one foot on the brake, the other on the gas "power braking" at xxx? RPM, then release the brake [/ul]i just dont know how far to push it...
Not that I would ever have the need to do this... But i'm curious:
What is the proper method of launch control? [ul][*]Dynamic mode or DSC OFF ?[*]foot on the brake then jump on the gas when the light turns green[*] OR[*]one foot on the brake, the other on the gas "power braking" at xxx? RPM, then release the brake [/ul]i just dont know how far to push it...
Tony
#4
#6
#7
(1) Sport shift mode
(2) Dynamic mode
(3) DSC completely off
(4) Left foot brake and mash the gas - the RPMs will hold around 1500
(5) get off the brake and hold on
(6) don't forget to shift
How's that for bringing a thread back from the dead?
(2) Dynamic mode
(3) DSC completely off
(4) Left foot brake and mash the gas - the RPMs will hold around 1500
(5) get off the brake and hold on
(6) don't forget to shift
How's that for bringing a thread back from the dead?
Last edited by duke_dallas; 06-06-2011 at 06:59 PM.
The following users liked this post:
MTK 1919 (10-29-2020)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jaguar Forums Editor
Jaguar Press release
0
09-14-2015 01:18 PM
hen555
XF and XFR ( X250 )
2
09-07-2015 11:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)